ASANTE TECHNOLOGIES, INC.
10BASET MINI MAU
|
Card Type |
Ethernet Transceiver |
|
Maximum Network Rate |
10Mbps |
|
Data Bus |
AUI |
|
Topology |
Star |
|
Wiring Type |
Unshielded twisted pair |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
AUI connector |
CN1 |
Unshielded twisted pair |
CN2 |
|
USER CONFIGURABLE SETTINGS | |||
|
Setting |
Label |
Position | |
|
Correct signal if polarity is reversed |
SW1/1 |
On | |
|
Do not correct signal if polarity is reversed |
SW1/1 |
Off | |
|
Link integrity function enabled |
SW1/2 |
On | |
|
Link integrity function disabled |
SW1/2 |
Off | |
|
Heartbeat function disabled |
SW1/3 |
On | |
|
Heartbeat function enabled |
SW1/3 |
Off | |
|
Note: The signal inversion correction should always be enabled when an Asante hub is used. | |||
|
DIAGNOSTIC LED(S) | |||
|
LED |
Color |
Status |
Condition |
|
LED1 |
Green |
On |
Transceiver is receiving power |
|
LED1 |
Green |
Off |
Transceiver is not receiving power |
|
LED2 |
Green |
On |
Network connection is good |
|
LED2 |
Green |
Off |
Network connection is broken |
|
LED3 |
Green |
On |
Transceiver is receiving from network |
|
LED3 |
Green |
Off |
Transceiver is not receiving from network |
|
LED4 |
Green |
On |
Transceiver is transmitting to network |
|
LED4 |
Green |
Off |
Transceiver is not transmitting to network |
|
LED5 |
Yellow |
On |
10Base-T polarity reversed |
|
LED5 |
Yellow |
Off |
10Base-T polarity correct |
|
LED6 |
Yellow |
On |
Network collision detected |
|
LED6 |
Yellow |
Off |
Network collision not detected |