ANSEL COMMUNICATIONS, INC.
NC2000 REVISION A
NIC Type |
Ethernet |
Transfer Rate |
10Mbps |
Data Bus |
16-bit ISA |
Topology |
Linear bus |
Wiring Type |
Unshielded twisted pair
|
Boot ROM |
Available |
CABLE TYPE | ||
Type |
NETCFG | |
Unshielded twisted pair |
Configuration 2 | |
RG58A/U 50ohm coaxial |
Configuration 3 | |
AUI transceiver via DB-15 port |
Configuration 1 |
BOOT ROM | ||
Setting |
W1 | |
Disabled |
Closed | |
Enabled |
Open |
LINK INTEGRITY | ||
Function |
W2 | |
Link intergity enabled |
Closed | |
Link integrity disabled |
Open | |
Note: If card is used in a pre-10BaseT cabling network, disable the link integrity function. |
BASE I/O ADDRESS | |||
Address |
SW1/1 |
SW1/2 | |
300h |
Off |
Off | |
320h |
Off |
On | |
340h |
On |
Off | |
360h |
On |
On |
BOOT ROM ADDRESS | |||
Address |
SW1/3 |
SW1/4 | |
C800h |
Off |
Off | |
CC00h |
Off |
On | |
D000h |
On |
Off | |
D400h |
On |
On |
INTERRUPT SETTINGS | ||||
IRQ |
SW1/5 |
SW1/6 |
SW1/7 |
SW1/8 |
2/9 |
Off |
On |
On |
On |
3 |
On |
On |
On |
Off |
4 |
On |
On |
Off |
On |
5 |
On |
Off |
On |
On |