3COM
ETHERLINK III 3C509B-COMBO
NIC Type |
Ethernet |
Network Transfer Rate |
10Mbps |
Data Bus |
16-bit ISA |
Topology |
Linear Bus, Star |
Wiring Type |
Unshielded twisted pair AUI transceiver via DB-15 port RG-58A/U 50ohm coaxial |
Boot ROM |
Available (location unidentified) |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
Unshielded twisted pair port |
CN1 |
RG-58A/U 50ohm coaxial port |
CN3 |
AUI transceiver via DB-15 port |
CN2 |
DIAGNOSTIC LED(S) | ||
LED |
Status |
Condition |
LED1 |
On |
Network connection is good |
LED1 |
Blinking |
Cable Polarity is reversed |
LED1 |
Off |
Network connection is broken |
Note: When you first install the adapter and power up the computer, the LED lights, but the network connection is not active. For the network connection to be good you need to run the Group 3 test or have loaded the network drivers. |