SIEMENS NIXDORF INFORMATIONSSYSTEME AG
S26361-D824
Processor |
80486SX/80486SX2/80486DX/80486DX2 |
Processor Speed |
25/33/50(internal)/66(internal)MHz |
Chip Set |
Unidentified |
Video Chip Set |
Unidentified |
Maximum Onboard Memory |
32MB |
Maximum Video Memory |
1MB |
Cache |
None |
BIOS |
Unidentified |
Dimensions |
254mm x 218mm |
I/O Options |
Floppy drive interface, IDE interface, parallel port, PS/2 mouse port, serial ports (2), video pass through connector, VGA port, riser slot |
NPU Options |
None |
CONNECTIONS | |||
Purpose |
Location |
Purpose |
Location |
Video pass through connector |
CN1 |
IDE interface |
CN7 |
PS/2 mouse port |
CN2 |
Floppy drive interface |
CN8 |
Serial port 1 |
CN3 |
Front panel connector |
CN9 |
Serial port 2 |
CN4 |
Speaker |
CN10 |
Parallel port |
CN5 |
Riser slot |
SL1 |
VGA port |
CN6 |
Reset switch |
X31 |
USER CONFIGURABLE SETTINGS | |||
Function |
Label |
Position | |
On board video enabled |
X60 |
Pins 1 & 2 closed | |
On board video disabled |
X60 |
Pins 2 & 3 closed | |
|
VGA IRQ9 disabled |
X161 |
Pins 1 & 2 closed |
VGA IRQ9 enabled |
X161 |
Pins 2 & 3 closed | |
|
PS/2 mouse IRQ12 enabled |
X162 |
Pins 1 & 2 closed |
PS/2 mouse IRQ12 disabled |
X162 |
Pins 2 & 3 closed | |
|
Monitor type select color |
X165 |
Pins 1 & 2 closed |
Monitor type select monochrome |
X165 |
Pins 2 & 3 closed | |
|
CMOS memory normal operation |
X166 |
Pins 1 & 2 closed |
CMOS memory clear |
X166 |
Pins 2 & 3 closed | |
Floppy drive write protect disabled |
X192 |
Pins 1 & 2 closed | |
Floppy drive write protect enabled |
X192 |
Pins 2 & 3 closed |
DRAM CONFIGURATION | ||
Size |
Bank 0 |
Bank 1 |
4MB |
(1) 1M x 36 |
None |
8MB |
(1) 2M x 36 |
None |
8MB |
(1) 1M x 36 |
(1) 1M x 36 |
12MB |
(1) 2M x 36 |
(1) 1M x 36 |
16MB |
(1) 2M x 36 |
(1) 2M x 36 |
16MB |
(1) 4M x 36 |
None |
24MB |
(1) 4M x 36 |
(1) 2M x 36 |
32MB |
(1) 4M x 36 |
(1) 4M x 36 |
32MB |
(1) 8M x 36 |
None |
VIDEO MEMORY CONFIGURATION | ||
Size |
Bank 0 |
Bank 1 |
512KB |
512KB |
None |
1MB |
512KB |
512KB |
Note: The size of the chip is unidentified. |
CPU SPEED SELECTION | |
Speed |
X41 |
25MHz |
Pins 1 & 2 closed |
33MHz |
Pins 2 & 3 closed |
50iMHz |
Pins 1 & 2 closed |
66iMHz |
Pins 2 & 3 closed |
CPU TYPE SELECTION | |
Type |
X33 |
80486SX |
Pins 1 & 2 closed |
80486SX2 |
Pins 2 & 3 closed |
80486DX |
Pins 2 & 3 closed |
80486DX2 |
Pins 2 & 3 closed |
CPU TYPE SELECTION | ||
Type |
X32 | |
Write through |
Pins 1 & 2 closed | |
Write back |
Pins 2 & 3 closed |
MISCELLANEOUS TECHNICAL NOTE |
Note: The location of pin 1 on the connectors are unidentified. Jumpers that are not labeled may be factory configured. |