INTEL CORPORATION
AG430HX
Processor |
Pentium |
Processor Speed |
75/90/100/120/133/150/166/200MHz |
Chip Set |
Intel |
Video Chip Set |
ATI |
Maximum Onboard Memory |
128MB (EDO supported) |
Maximum Video Memory |
2MB |
Cache |
256KB |
BIOS |
Intel |
Dimensions |
304mm x 243mm |
I/O Options |
32-bit PCI slots (4), floppy drive interface, green PC connector, IDE interfaces (2), parallel port, PS/2 mouse port, serial ports (2), VESA feature connector, VGA port, IR connector, USB connectors (2), soft off power supply, wavetable connectors (2), telephony connector, audio out connector, microphone in connector, audio in connector, MIDI/game port, CD-ROM connector |
NPU Options |
None |
CONNECTIONS | |||
Purpose |
Location |
Purpose |
Location |
Microphone in connector |
J1 |
Wavetable connector |
J6D1 |
Audio in connector |
J2 |
Floppy drive interface |
J7L2 |
Audio out connector |
J3 |
VESA feature connector |
J8C1 |
CD-ROM connector |
J1E1 |
IDE interface 2 |
J8F1 |
Telephony connector |
J1F1 |
IDE interface 1 |
J9F1 |
MIDI/game port |
J1G1 |
Chassis fan power |
J10A1 |
VGA port |
J1J1 |
Front panel power switch |
J10J1 pins 1 & 2 |
Parallel port |
J1J2 |
Green PC connector |
J10J1 pins 3 & 4 |
USB connector |
J1L1 |
IR connector |
J10J1 pins 6 - 11 |
USB connector |
J1L2 |
IDE interface LED |
J10J1 pins 13 - 16 |
PS/2 mouse port |
J1M1 |
Green PC LED |
J10J1 pins 18 - 21 |
Serial port 1 |
J2H1 |
Reset switch |
J10J1 pins 22 & 23 |
Serial port 2 |
J3H1 |
Speaker |
J10J1 pins 24 - 27 |
Wavetable connector |
J6C1 |
32-bit PCI slots |
PC1 - PC4 |
USER CONFIGURABLE SETTINGS | |||
Function |
Label |
Position | |
|
Password enabled |
J10E1A |
Pins 1 & 2 closed |
Password disabled |
J10E1A |
Pins 2 & 3 closed | |
|
CMOS memory normal operation |
J10E1A |
Pins 4 & 5 closed |
CMOS memory clear |
J10E1A |
Pins 5 & 6 closed | |
|
Setup access enabled |
J10E1B |
Pins 1 & 2 closed |
Setup access disabled |
J10E1B |
Pins 2 & 3 closed | |
|
Flash BIOS normal operation |
J10E1B |
Pins 4 & 5 closed |
Flash BIOS recovery mode |
J10E1B |
Pins 5 & 6 closed |
DRAM CONFIGURATION | ||
Size |
Bank 0 |
Bank 1 |
8MB |
(2) 1M x 32 |
None |
16MB |
(2) 2M x 32 |
None |
16MB |
(2) 1M x 32 |
(2) 1M x 32 |
24MB |
(2) 2M x 32 |
(2) 1M x 32 |
24MB |
(2) 1M x 32 |
(2) 2M x 32 |
32MB |
(2) 4M x 32 |
None |
32MB |
(2) 2M x 32 |
(2) 2M x 32 |
40MB |
(2) 4M x 32 |
(2) 1M x 32 |
40MB |
(2) 1M x 32 |
(2) 4M x 32 |
48MB |
(2) 4M x 32 |
(2) 2M x 32 |
48MB |
(2) 2M x 32 |
(2) 4M x 32 |
64MB |
(2) 8M x 32 |
None |
64MB |
(2) 4M x 32 |
(2) 4M x 32 |
72MB |
(2) 8M x 32 |
(2) 1M x 32 |
DRAM CONFIGURATION (CONT) | ||
Size |
Bank 0 |
Bank 1 |
72MB |
(2) 1M x 32 |
(2) 8M x 32 |
80MB |
(2) 8M x 32 |
(2) 2M x 32 |
80MB |
(2) 2M x 32 |
(2) 8M x 32 |
96MB |
(2) 8M x 32 |
(2) 4M x 32 |
96MB |
(2) 4M x 32 |
(2) 8M x 32 |
128MB |
(2) 8M x 32 |
(2) 8M x 32 |
Note: Board accepts EDO memory. Board also accepts x 36 SIMMs. Banks are interchangeable. |
CACHE CONFIGURATION |
Note: 256KB cache is factory installed and is not configurable. |
VIDEO MEMORY CONFIGURATION |
Note: 2MB video memory is factory installed and is not configurable. |
CPU SPEED SELECTION | ||||
CPU speed |
Clock speed |
Multiplier |
J10E1C |
J10E1D |
75MHz |
50MHz |
1.5x |
2 & 3, 5 & 6 |
1 & 2, 4 & 5 |
90MHz |
60MHz |
1.5x |
2 & 3, 4 & 5 |
1 & 2, 4 & 5 |
100MHz |
66MHz |
1.5x |
1 & 2, 5 & 6 |
1 & 2, 4 & 5 |
120MHz |
60MHz |
2x |
2 & 3, 4 & 5 |
2 & 3, 4 & 5 |
133MHz |
66MHz |
2x |
1 & 2, 5 & 6 |
2 & 3, 4 & 5 |
150MHz |
60MHz |
2.5x |
2 & 3, 4 & 5 |
2 & 3, 5 & 6 |
166MHz |
66MHz |
2.5x |
1 & 2, 5 & 6 |
2 & 3, 5 & 6 |
200MHz |
66MHz |
3x |
1 & 2, 5 & 6 |
1 & 2, 5 & 6 |
Note: Pins designated should be in the closed position. |