INTEL CORPORATION
ADVANCED/AS
Processor |
Pentium |
Processor Speed |
75/90/100/120/133/150/166/200MHz |
Chip Set |
Intel |
Video Chip Set |
ATI |
Maximum Onboard Memory |
128MB (EDO supported) |
Maximum Video Memory |
2MB |
Cache |
256/512KB |
BIOS |
AMI |
Dimensions |
330mm x 218mm |
I/O Options |
32-bit PCI slots (4), floppy drive interface, green PC connector, IDE interfaces (2), parallel port, PS/2 mouse port, serial ports (2), VESA feature connector, riser slot, cache slot, IR connector, wave table connector, audio connector, CD-ROM connector |
NPU Options |
None |
CONNECTIONS | |||
Purpose |
Location |
Purpose |
Location |
Serial port 1 |
CN1 |
Turbo LED |
J5A1 pins 1 & 2 |
Serial port 2 |
CN2 |
IDE interface LED |
J5A1 pins 5 - 8 |
Floppy drive interface |
CN3 |
Power LED & keylock |
J5A1 pins 10 - 15 |
Parallel port |
CN4 |
Reset switch |
J5A1 pins 16 & 17 |
IDE interface 1 |
CN5 |
Green PC connector |
J5A2 pins 1 & 2 |
IDE interface 2 |
CN6 |
IR connector |
J5A2 pins 4 - 8 |
Video connector (optional) |
CN7 |
Chassis fan power |
J5A2 pins 10 - 12 |
Wave table connector |
CN8 |
Speaker |
J5A2 pins 14 - 17 |
CD-ROM interface |
CN9 |
Soft off/sleep |
J7A1 |
PS/2 mouse port |
CN10 |
Soft power supply on |
J8M2 |
Audio connector |
CN11 |
32-bit PCI slots |
PC1 - PC4 |
VESA feature connector |
CN12 |
Cache slot |
SL1 |
USER CONFIGURABLE SETTINGS | |||
Function |
Label |
Position | |
Factory configured - do not alter (pins 1, 2, & 3 only) |
J1N1 |
N/A | |
|
Password normal operation |
J7F1 |
Pins 4 & 5 closed |
Password clear |
J7F1 |
Pins 5 & 6 closed | |
|
Setup access enabled |
J7F2 |
Pins 1 & 2 closed |
Setup access disabled |
J7F2 |
Pins 2 & 3 closed | |
|
CMOS memory normal operation |
J7F2 |
Pins 4 & 5 closed |
CMOS memory clear |
J7F2 |
Pins 5 & 6 closed |
DRAM CONFIGURATION | ||
Size |
Bank 0 |
Bank 1 |
8MB |
(2) 1M x 32 |
None |
16MB |
(2) 2M x 32 |
None |
16MB |
(2) 1M x 32 |
(2) 1M x 32 |
24MB |
(2) 2M x 32 |
(2) 1M x 32 |
24MB |
(2) 1M x 32 |
(2) 2M x 32 |
32MB |
(2) 4M x 32 |
None |
32MB |
(2) 2M x 32 |
(2) 2M x 32 |
40MB |
(2) 4M x 32 |
(2) 1M x 32 |
40MB |
(2) 1M x 32 |
(2) 4M x 32 |
48MB |
(2) 4M x 32 |
(2) 2M x 32 |
48MB |
(2) 2M x 32 |
(2) 4M x 32 |
64MB |
(2) 8M x 32 |
None |
64MB |
(2) 4M x 32 |
(2) 4M x 32 |
72MB |
(2) 8M x 32 |
(2) 1M x 32 |
72MB |
(2) 1M x 32 |
(2) 8M x 32 |
80MB |
(2) 8M x 32 |
(2) 2M x 32 |
DRAM CONFIGURATION (CONT) | ||
Size |
Bank 0 |
Bank 1 |
80MB |
(2) 2M x 32 |
(2) 8M x 32 |
96MB |
(2) 8M x 32 |
(2) 4M x 32 |
96MB |
(2) 4M x 32 |
(2) 8M x 32 |
128MB |
(2) 8M x 32 |
(2) 8M x 32 |
Note: Board accepts EDO memory. The location of banks 0 & 1 are unidentified. Board also accepts x 36 SIMMs. |
CACHE CONFIGURATION | |||
Size |
Bank 0 |
SL1 |
TAG |
256KB |
(2) 32K x 32 |
None |
Unidentified |
512KB |
(2) 32K x 32 |
256KB module installed |
Unidentified |
Note: The size of the TAG chip is unidentified. |
VIDEO MEMORY CONFIGURATION | ||
Size |
Bank 0 |
Bank 1 |
1MB |
1MB |
None |
2MB |
1MB |
(2) 256K x 16 |
Note: Bank 0 is factory installed and is not configurable. |
CPU SPEED SELECTION | |||||
CPU speed |
Clock speed |
Multiplier |
J1N1 |
J8F1 |
J8F2 |
75MHz |
50MHz |
1.5x |
4 & 5 |
1 & 2, 5 & 6 |
1 & 2 |
90MHz |
60MHz |
1.5x |
4 & 5 |
1 & 2, 4 & 5 |
1 & 2 |
100MHz |
66MHz |
1.5x |
4 & 5 |
2 & 3, 5 & 6 |
1 & 2 |
120MHz |
60MHz |
2x |
4 & 5 |
1 & 2, 4 & 5 |
2 & 3 |
133MHz |
66MHz |
2x |
4 & 5 |
2 & 3, 5 & 6 |
2 & 3 |
150MHz |
60MHz |
2.5x |
5 & 6 |
1 & 2, 4 & 5 |
2 & 3 |
166MHz |
66MHz |
2.5x |
5 & 6 |
2 & 3, 5 & 6 |
2 & 3 |
200MHz |
66MHz |
3x |
5 & 6 |
2 & 3, 5 & 6 |
1 & 2 |
Note: Pins designated should be in the closed position. |
CPU VOLTAGE SELECTION | |
Voltage |
J8F2 |
3.3v - 3.3465v |
Pins 4 & 5 closed |
3.465v - 3.63v |
Pins 5 & 6 closed |
CPU ISA BUS CLOCK SELECTION | |||
Clock speed |
Bus speed |
J7F1 | |
50MHz |
8.33MHz |
Pins 1 & 2 or 2 & 3 closed | |
60MHz |
7.5MHz |
Pins 1 & 2 closed | |
60MHz |
10MHz |
Pins 2 & 3 closed | |
66MHz |
8.25MHz |
Pins 1 & 2 closed | |
66MHz |
11MHz |
Pins 2 & 3 closed |