IBM CORPORATION
PS/VALUEPOINT 6384 433DX/466DX2
Processor |
80486DX/80486DX2 |
Processor Speed |
33/66(internal)MHz |
Chip Set |
Intel |
Max. Onboard DRAM |
32MB |
Cache |
8KB/128KB (location unknown) |
BIOS |
IBM |
Dimensions |
330mm x 218mm |
I/O Options |
32-bit riser card slot, floppy drive interface, hard drive interface, parallel port, PS/2 mouse port, serial ports (2), video port |
NPU Options |
None |
CONNECTIONS | |||
Purpose |
Location |
Purpose |
Location |
External battery |
J2 |
Hard drive LED |
J11 pins 4 & 5 |
Serial port 1 |
J4 |
Power on LED |
J11 pins 1 & 2 |
Serial port 2 |
J5 |
Riser card slot |
J12 |
Floppy drive interface |
J6 |
VESA feature connector |
J15 |
Parallel port |
J7 |
Video port |
J16 |
Hard drive interface |
J8 |
Power LED |
J23 |
PS/2 mouse port |
J10 |
USER CONFIGURABLE SETTINGS | |||
Function |
Jumper |
Position | |
|
Factory configured - do not alter |
JP4 |
Closed |
|
CMOS memory normal operation |
JP8 |
pins 1 & 2 closed |
CMOS memory clear |
JP8 |
pins 2 & 3 closed | |
|
Beeper enabled |
JP20 |
pins 1 & 2 closed |
Beeper disabled |
JP20 |
pins 3 & 4 closed | |
|
Mouse port enabled |
JP209 |
Closed |
Mouse port disabled |
JP209 |
Open | |
|
IRQ9 enabled |
JP305 |
Closed |
IRQ9 disabled |
JP305 |
Open | |
Note:The capacitor located at C17 must be used in conjunction with JP8 to erase the password. |
DRAM CONFIGURATION | ||
Size |
Bank 0 |
Bank 1 |
4MB |
(4) 1M x 9 |
None |
8MB |
(4) 1M x 9 |
(4) 1M x 9 |
16MB |
(1) 4M x 9 |
None |
32MB |
(1) 4M x 9 |
(1) 4M x 9 |
CACHE CONFIGURATION | |||||
Size |
JP200 |
JP201 |
JP206 |
JP207 | |
8KB |
pins 1 & 2 closed |
pins 1 & 2 closed |
pins 1 & 2 closed |
pins 1 & 2 closed | |
128KB |
pins 2 & 3 closed |
pins 2 & 3 closed |
pins 2 & 3 closed |
pins 2 & 3 closed |
VIDEO CONFIGURATION | |||
Port |
JP10 |
JP17 | |
Enabled |
pins 2 & 3 closed |
Open | |
Disabled |
pins 1 & 2 closed |
Closed |