DELL COMPUTER CORPORATION
POWEREDGE SP 5XX/POWEREDGE XE 5XX/OMNIPLEX 5XX-ME
Processor |
Pentium |
Processor Speed |
60/66MHz |
Chip Set |
Intel |
Max. Onboard DRAM |
192MB |
Cache |
256KB |
BIOS |
Intel |
Dimensions |
330mm x 218mm |
I/O Options |
32-bit riser card, floppy drive interface, IDE interface, parallel port, PS/2 mouse port, SCSI connector, serial ports (2), VGA port |
NPU Options |
None |
CONNECTIONS | |||
Purpose |
Location |
Purpose |
Location |
VGA port |
CN1 |
Floppy drive interface |
CN8 |
Parallel port |
CN2 |
External battery |
CN9 |
Serial port 1 |
CN3 |
Speaker |
CN10 |
Serial port 2 |
CN4 |
Chassis fan power |
CN11 |
PS/2 mouse port |
CN5 |
Front panal connector |
CN13 |
Feature connector |
CN6 |
IDE interface LED |
CN16 |
IDE interface |
CN7 |
32-bit riser card slot |
S1 |
USER CONFIGURABLE SETTINGS | |||
Function |
Jumper/Switch |
Position | |
|
Factory configured - do not alter |
J15A |
Open |
|
EISA configuration utility settings normal operation |
J15B |
Open |
EISA configuration utility settings clear |
J15B |
Closed | |
|
Factory configured - do not alter |
J15C |
Open |
|
Factory configured - do not alter |
J15D |
Open |
|
Factory configured - do not alter |
JP1 |
Closed |
|
Integrated SCSI host adapter disabled |
SCSI |
Closed |
Integrated SCSI host adapter enabled |
SCSI |
Open | |
|
Factory configured - do not alter |
SMI |
Closed |
|
Monitor type built in VGA enabled |
SW1/1 |
On |
Monitor type built in VGA disabled |
SW1/1 |
Off | |
|
System password enabled |
SW1/2 |
On |
System password disabled |
SW1/2 |
Off | |
|
I/O controller uses addresses 26Eh to 26Fh |
SW1/3 |
On |
I/O controller uses addresses 398h to 399h |
SW1/3 |
Off | |
|
Flash BIOS update enabled |
SW1/4 |
On |
Flash BIOS update disabled |
SW1/4 |
Off |
DRAM CONFIGURATION | |||
Size |
Bank 0 |
Bank 1 |
Bank 2 |
8MB |
(2) 1M x 36 |
NONE |
NONE |
16MB |
(2) 1M x 36 |
(2) 1M x 36 |
NONE |
24MB |
(2) 1M x 36 |
(2) 1M x 36 |
(2) 1M x 36 |
32MB |
(2) 4M x 36 |
NONE |
NONE |
40MB |
(2) 4M x 36 |
(2) 1M x 36 |
NONE |
48MB |
(2) 4M x 36 |
(2) 1M x 36 |
(2) 1M x 36 |
64MB |
(2) 4M x 36 |
(2) 4M x 36 |
NONE |
DRAM CONFIGURATION (CONT.) | |||
Size |
Bank 0 |
Bank 1 |
Bank 2 |
72MB |
(2) 4M x 36 |
(2) 4M x 36 |
(2) 1M x 36 |
96MB |
(2) 4M x 36 |
(2) 4M x 36 |
(2) 4M x 36 |
128MB |
(2) 16M x 36 |
NONE |
NONE |
136MB |
(2) 16M x 36 |
(2) 1M x 36 |
NONE |
144MB |
(2) 16M x 36 |
(2) 1M x 36 |
(2) 1M x 36 |
160MB |
(2) 16M x 36 |
(2) 4M x 36 |
NONE |
192MB |
(2) 16M x 36 |
(2) 4M x 36 |
(2) 4M x 36 |
CPU SPEED CONFIGURATION | ||
Speed |
J15F |
J15E |
60MHz |
Closed |
Open |
66MHz |
Open |
Closed |
VIDEO MEMORY CONFIGURATION | ||
Size |
Bank 0 |
Bank 1 |
1M |
(4) 44256 |
NONE |
2M |
(4) 44256 |
(4) 44256 |
CONNECTIONS | |||
Purpose |
Location |
Purpose |
Location |
SCSI connector |
CN18 |
32-bit PCI local bus slot |
PCI2 |
32-bit PCI local bus slot |
PCI1 |
CONNECTIONS | |||
Purpose |
Location |
Purpose |
Location |
Narrow SCSI port |
CN1 |
Port for Thermal Monitoring board |
CN3 |
Wide SCSI port |
CN2 |
SCSI ID CONFIGURATION | |||
SCSI IDs |
Switch |
DSA Host Adapter |
Non-DSA Host Adapter |
Bay A = ID4 |
SW2/switch 1 |
On |
Off |
Bay B = ID1 |
SW2/switch 2 |
Off |
Off |
Bay C = ID2 |
SW2/switch 3 |
Off |
Off |
Bay D = ID3 |
SW2/switch 4 |
On |
Off |
MISCELLANEOUS TECHNICAL NOTE |
The SCSI backplane board is an option and may not always be present on the mainboard. |
CONNECTIONS | |||
Purpose |
Location |
Purpose |
Location |
Speaker |
CN1 |
SCSI connector |
SCSIA |
Panel connector |
CN2 |
SCSI connector |
SCSIB |
manufacturers connector |
CN3 |
Temp connector |
TEMP1 |
Connection to system board |
CN4 |
Temp connector |
TEMP2 |
Fan |
FAN1 |
Temp connector |
TEMP3 |
Fan |
FAN2 |
Temp connector |
TEMP4 |
Fan |
FAN3 |
Test connector |
TST |
THERMAL MONITORING BOARD CONFIGURATION | |
Thermal monitoring board installed |
Setting |
SW3/switch 1 |
On |
SW3/switch 2 |
On |
SW3/switch 3 |
On |
SW3/switch 4 |
Off |
SW4/switch 1 |
On |
SW4/switch 2 |
Off |
SW4/switch 3 |
On |
SW4/switch 4 |
Off |
LED CONFIGURATION | |
LED |
Function |
LED1 |
Thermal monitoring |
LED2 |
Temperature |
LED3 |
Fan |
LED4 |
Power |
MISCELLANEOUS TECHNICAL NOTE |
JP1 is factory configured and should not be altered. |