ADVANTECH CO., LTD.
PCM-4825L
Device Type |
Single board computer |
Processor |
AM DX5 |
Processor Speed |
133MHz |
Chip Set |
VIA VT82C496G |
Video Chip Set |
Chips and Technology |
Maximum Onboard Memory |
32MB (EDO supported) |
Maximum Video Memory |
1MB |
Cache |
None |
BIOS |
Award |
Dimensions |
145mm x 102mm |
I/O Options |
Floppy drive interface, IDE interface, parallel port, PS/2 mouse port, serial ports (2), VGA port, IR connector, PC/104 connectors (2) |
CONNECTIONS | |||
Purpose |
Location |
Purpose |
Location |
Power connector |
CN1 |
Serial port 2 |
CN9 |
Floppy drive interface |
CN2 |
Power connector |
CN12 |
PC/104 connector |
CN3 |
Serial port 1 |
CN13 |
Parallel port |
CN4 |
PS/2 mouse port |
CN14 |
PC/104 connector |
CN5 |
VGA port |
CN15 |
Flat panel connector |
CN6 |
Reset switch |
J6 |
IDE interface |
CN7 |
LED |
LED |
IR connector |
CN8 |
USER CONFIGURABLE SETTINGS | |||
Function |
Label |
Position | |
|
LCD voltage select 5v |
J3 |
Pins 2 & 3 closed |
LCD voltage select 3.3v |
J3 |
Pins 1 & 2 closed | |
|
CMOS memory normal operation |
J4 |
Pins 2 & 3 closed |
CMOS memory clear |
J4 |
Pins 1 & 2 closed |
SIMM CONFIGURATION | |
Size |
Bank 0 |
1MB |
(1) 256K x 36 |
2MB |
(1) 512K x 36 |
4MB |
(1) 1M x 36 |
8MB |
(1) 2M x 36 |
16MB |
(1) 4M x 36 |
32MB |
(1) 8M x 36 |
Note: Board accepts EDO memory. |
VIDEO MEMORY CONFIGURATION |
Note: The location of the video memory is unidentified. |
SERIAL PORT 2 SELECTION | ||
Setting |
J7 | |
RS-232 |
Pins 1 & 2 closed | |
RS-422 |
Pins 3 & 4 closed | |
RS-485 |
Pins 5 & 6 closed |
DISK ADDRESS SELECTION | ||||
Address |
J2/pins 1 & 2 |
J2/pins 3 & 4 |
J2/pins 5 & 6 | |
C800 |
Closed |
Closed |
Closed | |
CC00 |
Closed |
Closed |
Open | |
D000 |
Closed |
Open |
Closed | |
D400 |
Closed |
Open |
Open | |
D800 |
Open |
Closed |
Closed | |
DC00 |
Open |
Closed |
Open | |
E000 |
Open |
Open |
Closed | |
Disabled |
Open |
Open |
Open |