AMERICAN MEGATRENDS, INC.
VOYAGER II
Processor |
80486DX |
Processor Speed |
25/33MHz |
Chip Set |
AMI |
Max. Onboard DRAM |
32MB |
Cache |
128KB |
BIOS |
AMI |
Dimensions |
355.6mm x 305.2mm |
I/O Options |
32-bit external memory card slot, proprietary AMI bus connector |
NPU Options |
4167 |
CONNECTIONS | |||
Purpose |
Location |
Purpose |
Location |
52 pin AMI proprietary connector |
J1 |
Turbo switch |
J10 |
External battery |
J2 |
Reset switch |
J11 |
46 pin AMI proprietary connector |
J5 |
32-bit external memory card |
J13 |
Power LED & keylock |
J8 |
Turbo LED |
J15 |
Speaker |
J9 |
USER CONFIGURABLE SETTINGS | ||||
Function |
Jumper/Switch |
Position | ||
Power good signal detect from board |
J3 |
pins 1 & 2 closed | ||
Power good signal detect from power supply |
J3 |
pins 2 & 3 closed | ||
Interrupt select normal path |
J14 |
pins 2 & 3 closed | ||
Interrupt select latched for 80486 correction |
J14 |
pins 1 & 2 closed | ||
I/O bus speed (sysclock) select iOsc/2 |
J17 |
1 & 2, 3 & 4 closed | ||
I/O bus speed (sysclock) select iOsc/3 |
J17 |
Open | ||
I/O bus speed (sysclock) select iOsc/4 |
J17 |
pins 3 & 4 closed | ||
Factory configured - do not alter |
SW1/1 |
Off | ||
Monitor type select monochrome |
SW1/2 |
Off | ||
Monitor type select color |
SW1/2 |
On | ||
Note : Cache is factory installed and is not configurable. The size and location of cache and tag are unidentified. |
DRAM CONFIGURATION | ||
Size |
Bank 1 |
Bank 2 |
1MB |
(4) 256K x 9 |
NONE |
2MB |
(4) 256K x 9 |
(4) 256K x 9 |
4MB |
(4) 1M x 9 |
NONE |
8MB |
(4) 1M x 9 |
(4) 1M x 9 |
16MB |
(4) 4M x 9 |
NONE |
32MB |
(4) 4M x 9 |
(4) 4M x 9 |