UNIDENTIFIED
SERIAL/PARALLEL INTERFACE CARD
|
Card Type |
Multi I/O card |
|
Chipset/Controller |
Unidentified |
|
I/O Options |
Parallel port, serial ports (2) |
|
Maximum DRAM |
N/A |
|
CONNECTIONS | |||
|
Purpose |
Location |
Purpose |
Location |
|
Serial port 2 |
J1 |
Parallel port |
J3 |
|
Serial port 1 |
J2 |
|
|
|
SERIAL PORT CONFIGURATION | |||
|
Port 1 (J2) |
SW1/1 |
SW1/3 | |
|
COM1 |
On |
Off | |
|
COM2 |
Off |
On | |
|
Disabled |
Off |
Off | |
|
SERIAL PORT CONFIGURATION | |||
|
Port 2 (J1) |
SW1/1 |
SW1/3 | |
|
COM1 |
On |
Off | |
|
COM2 |
Off |
On | |
|
Disabled |
Off |
Off | |
|
PARALLEL PORT CONFIGURATION | ||||
|
Port |
LPT |
SW1/2 |
JP2 | |
|
Enabled |
1 |
On |
Pins 2 & 3 closed | |
|
Disabled |
2 |
Off |
Pins 1 & 2 closed | |
|
COM PORT CHANGE CONFIGURATION | ||
|
Port |
JP1 | |
|
Normal |
Pins 1 & 2, 4 & 5 closed | |
|
Change |
Pins 2 & 3, 5 & 6 closed | |
|
Note: This jumper should be changed from the "Normal" setting if LPT is enabled. When JP1 is in "Change", COM1 and COM2 are reversed. | ||
|
FACTORY CONFIGURED - DO NOT ALTER | |
|
Switch |
Position |
|
SW1/4 |
N/A |