QUATECH, INC.
DM12-10
|
Category |
Digital to analog signal converter |
|
Chipset Controller |
Unidentified |
|
I /O Options Supported |
Digital signal input via module connector |
|
Maximum Onboard Memory |
N/A |
|
CONNECTIONS | |||
|
Purpose |
Location |
Purpose |
Location |
|
Output connector |
H1 |
Potentiometer: channel 0 gain adjust |
P2 |
|
Expansion card connector |
H2 |
Potentiometer: channel 1 offset adjust |
P3 |
|
Potentiometer: channel 0 offset adjust |
P1 |
Potentiometer: channel 2 gain adjust |
P4 |
|
CHANNEL 0 OUTPUT SIGNAL | ||
|
Setting |
J1 | |
|
Bipolar/-5 to 5V |
Pins 2 & 9, 5 & 6 closed | |
|
Bipolar/-2.5 to 2.5V |
Pins 2 & 9, 3 & 8, 5 & 6 closed | |
|
Bipolar/10V |
Pins 3 & 4, 2 & 9 closed | |
|
Unipolar/0 to 5V |
Pins 1 & 10, 3 & 8, 5 & 6 closed | |
|
Unipolar/0 to 10V |
Pins 5 & 6, 1 & 10 closed | |
|
CHANNEL 1 OUTPUT SIGNAL | ||
|
Setting |
J2 | |
|
Bipolar/-5 to 5V |
Pins 2 & 9, 5 & 6 closed | |
|
Bipolar/-2.5 to 2.5V |
Pins 2 & 9, 3 & 8, 5 & 6 closed | |
|
Bipolar/10V |
Pins 3 & 4, 2 & 9 closed | |
|
Unipolar/0 to 5V |
Pins 1 & 10, 3 & 8, 5 & 6 closed | |
|
Unipolar/0 to 10V |
Pins 5 & 6, 1 & 10 closed | |
|
FACTORY CONFIGURED SETTINGS | |
|
Jumper |
Setting |
|
J3 |
N/A |
|
MISCELLANEOUS TECHNICAL NOTES |
|
The DM12-10 is a modular daughter-card designed to work with the Quatech PXB-721 or MXI-241. Channel 0 output is taken from pins 1, 2, or 3 of header H1. Channel 1 output is taken from pins 5, 6, or 7 of header H1. The rest of the pins of header H1 are grounded. |