QUATECH, INC.
ADM12-11
|
Category |
Analog to digital signal converter |
|
Chipset Controller |
Unidentified |
|
I /O Options Supported |
External clock input, external trigger input |
|
Maximum Onboard Memory |
N/A |
|
CONNECTIONS |
|||
|
Purpose |
Location |
Purpose |
Location |
|
Expansion card connector |
H1 |
Expansion card connector |
H2 |
|
CHANNEL MODES |
|||||
|
Setting |
J1/jumper A |
J1/jumper B |
J1/jumper C |
J5 |
|
|
16 single-ended channels |
Closed |
Closed |
Open |
Pins 3 & 7, 4 & 8 closed |
|
|
8 differential channels |
Open |
Open |
Closed |
Pins 3 & 7, 4 & 8 open |
|
|
INPUT SIGNAL |
||
|
Setting |
J3 |
|
|
Bipolar/-5 to 5V |
Pins 2 & 6, 4 & 8 closed |
|
|
Bipolar/-2.5 to 2.5V |
Pins 2 & 6, 3 & 7, 4 & 8 closed |
|
|
Unipolar/0 to 5V |
Pins 1 & 2, 3 & 7, 4 & 8 closed |
|
|
CONVERSION TIME |
||
|
Setting |
J4 |
|
|
12-bit resolution/25 s |
Pins 1 & 6, 4 & 5 closed |
|
|
10-bit resolution/21 s |
Pins 2 & 7 closed |
|
|
8-bit resolution/17 s |
Pins 3 & 8 closed |
|
|
CLOCK INPUT |
||
|
Setting |
J5 |
|
|
Internal clock |
Pins 5 & 6 closed |
|
|
External clock |
Pins 1 & 5 closed |
|
|
Note: The external clock signal is connected through pin 17 of the header H1. |
||
|
GAIN |
||
|
Setting |
J2 |
|
|
One |
All pins open |
|
|
Ten |
Pins 2 & 4 closed |
|
|
EXTERNAL TRIGGER |
||
|
Setting |
J5 |
|
|
Disabled |
Pins 1 & 2, 5 & 6 open |
|
|
Enabled |
Pins 1 & 2, 5 & 6 closed |
|
|
Note: The external trigger signal is connected through pin 17 of the header H1. |
||
|
MISCELLANEOUS TECHNICAL NOTES |
|
The ADM12-11 is a modular daughter-card designed to work with the Quatech PXB-721 or MXI-241. |