QUATECH, INC.
QS-100D, QS-100DS
|
Card Type |
I/O controller |
|
Chipset/Controller |
Unidentified UART |
|
I/O Options |
Serial ports (4) |
|
Maximum DRAM |
N/A |
|
CONNECTIONS | |
|
Purpose |
Location |
|
DB-37 connector for serial ports (4) |
CN1 |
|
CLOCK SPEED SELECT | ||
|
Speed |
J1 | |
|
18.432MHz |
Pins 2 & 5 closed | |
|
9.612MHz |
Pins 1 & 2, 5 & 6 closed | |
|
3.6864MHz |
Pins 2 & 3, 4 & 5 closed | |
|
1.8432MHz |
Pins 1 & 2, 3 & 6, 4 & 5 closed | |
|
I/O ADDRESS CONFIGURATION | ||
|
Address |
SW1 |
SW2 |
|
300h |
1 & 2, 3 & 4, 5 & 6 on |
3 & 4, 5 on |
|
06A0h |
1 & 2, 3 & 4, 5 on |
2 & 4 on |
|
5220h |
1 & 3, 5 & 6 on |
2 & 3, 4 on |
|
Note:The address range for the QS-100D is from 0 to FFFFh. The switches are a binary representation of the addresses. The switches have the following decimal values: SW1/1=8, SW1/2=4, SW1/3=2, SW1/4=1, SW1/5=8, SW1/6=4, SW2/1=2, SW2/2=8, SW2/3=4, SW2/4=2, SW2/5=1. | ||
|
INTERRUPT SELECT | |
|
IRQ |
J6 |
|
IRQ2 |
Pins 1 & 7 closed |
|
IRQ3 |
Pins 2 & 8 closed |
|
IRQ4 |
Pins 3 & 9 closed |
|
IRQ5 |
Pins 4 & 10 closed |
|
IRQ6 |
Pins 5 & 11 closed |
|
IRQ7 |
Pins 6 & 12 closed |
|
INTERRUPT STATUS REGISTER CONFIGURATION | |
|
Setting |
SW2/6 |
|
Interrupt Status |
On |
|
Scratchpad |
Off |
|
SERIAL PORT DTE/DCE CONFIGURATION | |
|
Serial Port 1 |
Serial Port 2 |
|
Jumper J2
|
Jumper J3
|
|
SERIAL PORT DTE/DCE CONFIGURATION | |
|
Serial Port 3 |
Serial Port 4 |
|
Jumper J4
|
Jumper J5
|