MEDIA VISION TECHNOLOGY, INC.
CDPC-AT INTERFACE CARD (650-0024-05)
|
Card Type |
CR-ROM Interface card |
|
Chip Set |
Unidentified |
|
Maximum Onboard Memory |
Unidentified |
|
I/O Options |
Interface connector |
|
Data Bus |
16-bit ISA |
|
CONNECTIONS | |
|
Function |
Label |
|
Interface connector |
CN1 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Label |
Position | |
|
DMA sharing - disabled |
J11 |
Pins 2 & 3 closed | |
|
DMA sharing - enabled |
J11 |
Pins 1 & 2 closed | |
|
PORT ADDRESS SELECTION | ||||
|
Setting |
J10/A |
J10/B |
J10/C | |
|
220 |
Open |
Open |
Closed | |
|
230 |
Open |
Closed |
Open | |
|
240 |
Closed |
Open |
Open | |
|
BOARD ID SELECTION |
|
Note: Closing J2/pins 5 & 6 forces the board base I/O address to 388h. When using the other jumper settings, the software scans for an available base I/O address. Refer to the manufacturers documentation for possible ID and base I/O settings. |
|
INTERRUPT SELECTION | |||||
|
Setting |
J13/A |
J13/B |
J13/C |
J13/D | |
|
IRQ2 |
Open |
Open |
Open |
Closed | |
|
IRQ3 |
Open |
Open |
Closed |
Open | |
|
IRQ5 |
Open |
Closed |
Open |
Open | |
|
IRQ7 |
Closed |
Open |
Open |
Open | |
|
MISCELLANEOUS TECHNICAL NOTES |
|
Note: Termination Power and termination settings are unidentified. |