KOUWELL ELECTRONIC CORPORATION
KW-530C
|
Card Type |
Floppy drive controller |
|
Processor |
8088/8086, 80286/80386 |
|
Processor Speed |
Unidentified |
|
Maximum Onboard Memory |
Unidentified |
|
Floppy drives supported |
360KB, 720KB, 1.2MB, 1.44MB |
|
Data Bus |
8-bit ISA |
|
CONNECTIONS | |
|
Function |
Location |
|
34-pin floppy drive connector |
CN1 |
|
HIGH CAPACITY DRIVE CONTROL SELECTION | |||
|
Function |
Label |
Position | |
|
High capacity drive control disabled |
JP1 |
Closed | |
|
High capacity drive control enabled |
JP1 |
Open | |
|
Note: For 8086/8088 based systems, the above jumper must be shorted regardless of drive capacity. | |||
|
USER CONFIGURABLE SETTINGS | ||
|
Function |
Label |
Position |
|
Floppy drive C and D in use for 8088/8086 system |
SW1/1 |
On |
|
Floppy drive C and D not in use for 8088/8086 system |
SW1/1 |
Off |
|
Drive B is 360KB or 720KB |
SW1/2 |
On |
|
Drive B is 1.2MB or 1.44MB |
SW1/2 |
Off |
|
Drive A is 360KB or 720KB |
SW1/3 |
On |
|
Drive A is 1.2MB or 1.44MB |
SW1/3 |
Off |
|
Hard drive controller installed |
SW1/4 |
On |
|
Hard drive controller not installed |
SW1/4 |
Off |