JUKO LABORATORIES, LTD.
M16-X
|
Card Type |
Multi-I/O |
|
Chipset Controller |
ASIC D-82 |
|
I/O Options |
Parallel port (1), Serial port (2), Game port (1), Floppy Drive interface (1) |
|
Maximum Dram |
Unidentified |
|
CONNECTIONS | |||
|
Purpose |
Location |
Purpose |
Location |
|
34-pin Floppy Drive |
CN1 |
15-pin Game port external |
CN4 |
|
10-pin Serial port internal |
CN2 |
25-pin Parallel port external |
CN5 |
|
10-pin Serial port internal |
CN3 | ||
|
PARALLEL PORT SELECTION | ||
|
Setting |
J1 |
J2 |
|
LPT1-(378-37Ah) |
Pins 1 & 2 closed |
Pins 2 & 3 closed |
|
LPT2-(278-27Ah) |
Pins 2 & 3 closed |
Pins 2 & 3 closed |
|
Disabled |
All open |
Pins 1 & 2 closed |
|
SERIAL PORT 1 SELECTION | ||
|
Setting |
J3 |
J4 |
|
COM1 - (3F8-3FFh) |
Pins 1 & 2 closed |
Pins 1 & 2 closed |
|
COM2 - (2F8-2FFh) |
Pins 2 & 3 closed |
Pins 2 & 3 closed |
|
Note:If Serial port 1 can only be configured as COM2 if the second serial port chips are not installed, (U13, U14 & U15). The location of U13, U14, U15 are unidentified. | ||
|
FLOPPY DRIVE CONFIGURATION | |||
|
Setting |
J5 |
J8 |
J9 |
|
Enabled |
Open |
Closed |
Closed |
|
Disabled |
Closed |
Open |
Open |
|
SERIAL PORT 1 CONFIGURATION | |
|
Setting |
J6 |
|
Enabled |
Open |
|
Disabled |
Closed |
|
SERIAL PORT 2 CONFIGURATION | |
|
Setting |
J7 |
|
Enabled |
Open |
|
Disabled |
Closed |
|
BIOS ADDRESS SELECTION | |
|
Address |
J10 |
|
CA00h |
Pins 1 & 2, 3 & 4 closed |
|
CC00h |
Pins 1 & 3, 2 & 4 closed |
|
CE00h |
Pins 1 & 2, 5 & 6 closed |