CREATIVE LABS, INC.
SOUNDBLASTER AWE32 (CT2760 REV. 3)
Card Type |
Sound card |
Chip Set |
Creative Technology |
Maximum Onboard Memory |
Unidentified |
I/O Options |
CD-ROM interfaces (3), microphone connector, line in connector, line out connector, speaker out connector, game/MIDI port, PC internal speaker, CD-ROM audio in connector, feature connector |
Data Bus |
16-bit ISA |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
Line in connector |
CN1 |
Mitsumi CD-ROM interface |
CN7 |
Microphone connector |
CN2 |
Sony CD-ROM interface |
CN8 |
Line out connector |
CN3 |
Panasonic CD-ROM interface |
CN9 |
Speaker out connector |
CN4 |
Feature connector |
CN10 |
Game/MIDI port |
CN5 |
PC internal speaker |
JP15 |
CD-ROM audio in connector |
CN6 |
USER CONFIGURABLE SETTINGS | |||
Function |
Label |
Position | |
EEPROM enabled |
EEPROM |
Unidentified | |
EEPROM disabled |
EEPROM |
Unidentified | |
Factory configured do not alter |
JP16 |
Unidentified | |
Factory configured do not alter |
JP17 |
Unidentified | |
Joystick enabled |
JYEN |
Closed | |
Joystick disabled |
JYEN |
Open | |
MP-401 enabled |
MBFEN |
Closed | |
MP-401 disabled |
MBFEN |
Open | |
MP-401 I/O address select 330 |
MSEL |
Closed | |
MP-401 I/O address select 300 |
MSEL |
Open | |
Factory configured do not alter |
SPDIF |
Unidentified |
DRAM CONFIGURATION |
Note: Board is factory installed with 512KB memory. The maximum amount of onboard memory is unidentified. |
DRAM JUMPER CONFIGURATION | ||
Setting |
JP2 | |
Memory upgrade disabled |
Pins 2 & 3 closed | |
Memory upgrade enabled |
Pins 1 & 2 closed |
AUDIO I/O ADDRESS SELECTION | |||
Address |
IOS0 |
IOS1 | |
220 |
Closed |
Closed | |
240 |
Open |
Closed | |
260 |
Closed |
Open | |
280 |
Open |
Open |
CSP CHIP SELECTION | ||
Setting |
APSD |
IFSD |
Enabled |
Open |
Open |
Disabled |
Closed |
Closed |