IPTools!

INTELLICON-NT960
CONNECT TECH, INC.

INTELLICON-NT960

Card Type	Serial
Processor	Intel i960
Processor Speed	Unidentified
Chip Set	Cirrus Logic CD1400 (on external module)
Maximum Onboard Memory	2MB SRAM/256KB dual-ported SRAM
I/O Options	Serial ports (128)
Data Bus	16-bit ISA

CONNECTIONS
Function	Label
Serial ports via DB-37 connector	CN1
Note:Standard serial ports are provided on an external expansion box.

USER CONFIGURABLE SETTINGS
Setting		Label	Position
�	Factory configured - do not alter	J11	Unidentified
�	Card will use 8-bit transfer mode	J12	Open
	Card will use 16-bit transfer mode	J12	Closed
�	Factory configured - do not alter	J13	Unidentified
�	Factory configured - do not alter	SW2/6	On
�	Factory configured - do not alter	SW2/7	On
�	Factory configured - do not alter	SW2/8	On

BASE I/O ADDRESS
Setting		SW1/1	SW1/2	SW1/3	SW1/4	SW1/5	SW1/6	SW1/7	SW1/8
	000h	On	On	On	On	On	On	On	On
	004h	Off	On	On	On	On	On	On	On
	008h	On	Off	On	On	On	On	On	On
	00Ch	Off	Off	On	On	On	On	On	On
	010h	On	On	Off	On	On	On	On	On
�	300h	On	On	On	On	On	On	Off	Off
	3ECh	Off	Off	On	Off	Off	Off	Off	Off
	3F0h	On	On	Off	Off	Off	Off	Off	Off
	3F4h	Off	On	Off	Off	Off	Off	Off	Off
	3F8h	On	Off	Off	Off	Off	Off	Off	Off
	3FCh	Off	Off	Off	Off	Off	Off	Off	Off
Note: A total of 256 base address settings are available. The switches are a binary representation of the decimal memory addresses. SW1/8 is the Most Significant Bit and switch SW1/1 is the Least Significant Bit. The switches have the following decimal values: SW1/8=512, SW1/7=256, SW1/6=128, SW1/5=64, SW1/4=32, SW1/3=16, SW1/2=8, SW1/1=4. Turn off the switches and add the values of the switches that are off to obtain the correct memory address. (Off=1, On=0)

SHARED RAM ADDRESS
Setting		SW2/1	SW2/2	SW2/3	SW2/4	SW2/5
	C0000h	On	On	On	On	On
	C2000h	Off	On	On	On	On
	C4000h	On	Off	On	On	On
	C6000h	Off	Off	On	On	On
	C8000h	On	On	Off	On	On
�	D0000h	On	On	On	Off	On
	F6000h	Off	Off	On	Off	Off
	F8000h	On	On	Off	Off	Off
	FA000h	Off	On	Off	Off	Off
	FC000h	On	Off	Off	Off	Off
	FE000h	Off	Off	Off	Off	Off
Note: A total of 32 base address settings are available. The switches are a binary representation of the decimal memory addresses. SW2/5 is the Most Significant Bit and switch SW2/1 is the Least Significant Bit. The switches have the following decimal values: SW2/5=131072, SW2/4=65536, SW2/3=32768, SW2/2=16384, SW2/1=8192. Turn off the switches and add the values of the switches that are off to a base value of 786,432 to obtain the correct memory address. (Off=1, On=0)

SRAM

There may be between 64KB and 2MB of SRAM memory on this card. Its configuration is unidentified.

DUAL-PORTED SRAM

There may be between 64KB and 256KB of dual-ported SRAM memory on this card. Its configuration is unidentified.