COMPUTER MODULES, INC.
BBU-IR1, BBU-IR5
|
Card Type |
Battery pack |
|
I/O Options |
DC power out |
|
Data Bus |
N/A (see technical note) |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
9V DC power out to Turbodisc |
P4 |
Battery test switch |
SW1 |
|
BATTERIES | |||||
|
Power |
Bank 0 |
Bank 1 |
Bank 2 |
Bank 3 |
Bank 4 |
|
500mAh |
(6) 1.5V AA |
NONE |
NONE |
NONE |
NONE |
|
1000mAh |
(6) 1.5V AA |
(6) 1.5V AA |
NONE |
NONE |
NONE |
|
1500mAh |
(6) 1.5V AA |
(6) 1.5V AA |
(6) 1.5V AA |
NONE |
NONE |
|
2000mAh |
(6) 1.5V AA |
(6) 1.5V AA |
(6) 1.5V AA |
(6) 1.5V AA |
NONE |
|
2500mAh |
(6) 1.5V AA |
(6) 1.5V AA |
(6) 1.5V AA |
(6) 1.5V AA |
(6) 1.5V AA |
|
Note: Ni-cad batteries must be used. If other types of batteries are used the hardware or batteries could be damaged. | |||||
|
DIAGNOSTIC LED(S) | |||
|
LED |
Color |
Status |
Condition |
|
LED1 |
Green |
On |
Board has sufficient charge to power Turbodisc |
|
LED1 |
Green |
Off |
Board does not have sufficient charge to power Turbodisc |
|
LED2 |
Green |
On |
Batteries are receiving power from Turbodisc AC adapter for charging |
|
LED2 |
Green |
Off |
Batteries are not receiving power from Turbodisc AC adapter for charging |
|
Note: These LEDs will only function when the battery test switch is pushed. | |||
|
MISCELLANEOUS TECHNICAL NOTES |
|
This card has no connectors on its card edge. It can therefore be installed in any 16-bit format card slot. It provides battery backup power for the Computer Modules, Inc. Turbodisc, document number V2116. |