UNIDENTIFIED
SUPER IDE CONTROLLER CARD
|
Chipset |
Winbond |
|
Data Bus |
16-bit ISA |
|
Card Size |
Full height, half length |
|
Hard Drives Supported |
Two IDE(AT) devices |
|
Floppy Drives Supported |
Unidentified |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
16-pin game port |
CN1 |
25-pin parallel port - external |
CN5 |
|
40-pin IDE(AT) connector |
CN2 |
Drive active LED |
JP1 |
|
34-pin cable connector - floppy drive |
CN3 |
IDE IOCHRDY signal |
JP9 |
|
10-pin serial port 1 - internal |
CN4 | ||
|
Note:The location of the second serial port is unidentified. | |||
|
USER CONFIGURABLE SETTINGS | |||
|
Setting |
Label |
Position | |
|
Serial port 1 enabled |
JP2 |
Pins 1 & 2 closed | |
|
Serial port 1 disabled |
JP2 |
Pins 2 & 3 closed | |
|
Game port enabled |
JP3 |
Pins 1 & 2 closed | |
|
Game port disabled |
JP3 |
Pins 2 & 3 closed | |
|
Floppy interface enabled |
JP4 |
Pins 1 & 2 closed | |
|
Floppy interface disabled |
JP4 |
Pins 2 & 3 closed | |
|
Parallel port address is LPT2: |
JP5 |
Pins 1 & 2 closed | |
|
Parallel port address is LPT3: |
JP5 |
Pins 2 & 3 closed | |
|
IDE(AT) interface enabled |
JP6 |
Pins 1 & 2 closed | |
|
IDE(AT) interface disabled |
JP6 |
Pins 2 & 3 closed | |
|
Serial port 2 enabled |
JP7 |
Pins 1 & 2 closed | |
|
Serial port 2 disabled |
JP7 |
Pins 2 & 3 closed | |
|
Hard drive is connected to IDE interface |
JP8 |
Pins 1 & 2 closed | |
|
Hard drive is not connected to IDE interface |
JP8 |
Pins 2 & 3 closed | |