XEBEC AMERICA
S1410
|
Data Bus |
External |
|
Card Size |
5.25 in. form factor |
|
Hard Drives supported |
Two ST-506/412(MFM) drives |
|
Floppy drives supported |
None |
|
CONNECTIONS | |||
|
Function |
Location |
Function |
Location |
|
34-pin cable connector - hard drive |
J1 |
Factory test connector - do not alter |
J4 |
|
20-pin data cable connector - drive 1 |
J2 |
4-pin power connector |
P1 |
|
20-pin data cable connector - drive 2 |
J3 |
50-pin SASI connector - external |
P2 |
|
Note: P2 is the interface to the host adapter. See Miscellaneous Technical Note. | |||
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Label |
Position | |
|
Factory configured - do not alter |
W1 |
Closed | |
|
Factory configured - do not alter |
W2 |
Closed | |
|
Sector size is 256 bytes, 32 sectors/track |
W3 |
Pins 1 & 2 closed | |
|
Sector size is 512 bytes, 17 sectors/track |
W3 |
Pins 2 & 3 closed | |
|
SASI ID SELECTION | ||
|
Setting |
Connection | |
|
0 |
Pin O0 to pin S closed | |
|
1 |
Pin O1 to pin S closed | |
|
2 |
Pin O2 to pin S closed | |
|
3 |
Pin O3 to pin S closed | |
|
4 |
Pin O4 to pin S closed | |
|
5 |
Pin O5 to pin S closed | |
|
6 |
Pin O6 to pin S closed | |
|
7 |
Pin O7 to pin S closed | |
|
MISCELLANEOUS TECHNICAL NOTE |
|
Note: The S1410 controller card is connected to the host adapter via the SASI bus (connector P2). Multiple controller cards may be daisy chained on this cable, with each controller assigned a unique SASI ID. When mutiple controllers are chained, install the terminator on the last card on the chain. |