UNITED MICROELECTRONICS CORPORATION
FSIO-UC3 (V1.1)
|
Data Bus |
16-bit ISA |
|
Card Size |
Half-length, half-height card |
|
Hard Drives supported |
Two IDE (AT) drives |
|
Floppy drives supported |
Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
|
CONNECTIONS | |||
|
Function |
Location |
Function |
Location |
|
40-pin IDE(AT) connector |
CN1 |
10-pin serial port 2 - internal |
CN5 |
|
34-pin cable connector - floppy drive |
CN2 |
25-pin parallel port - external |
CN6 |
|
16-pin game port |
CN3 |
4-pin connector - drive active LED |
J2 |
|
10-pin serial port 1 - internal |
CN4 | ||
|
Note: The location of J2 is unidentified. | |||
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Label |
Position | |
|
IOCHRDY signal disabled |
J1 |
Closed | |
|
IOCHRDY signal enabled |
J1 |
Open | |
|
Serial port 2 enabled |
JP2 |
Pins 1 & 2 closed | |
|
Serial port 2 disabled |
JP2 |
Pins 2 & 3 closed | |
|
Game port enabled |
JP3 |
Pins 1 & 2 closed | |
|
Game port disabled |
JP3 |
Pins 2 & 3 closed | |
|
Factory configured - do not alter |
JP4 |
Unidentified | |
|
Parallel port I/O address is 378-37Fh |
JP5 |
Pins 1 & 2 closed | |
|
Parallel port I/O address is 278-27Fh |
JP5 |
Pins 2 & 3 closed | |
|
Serial port 1 enabled |
JP6 |
Pins 1 & 2 closed | |
|
Serial port 1 disabled |
JP6 |
Pins 2 & 3 closed | |
|
Floppy drive interface enabled |
JP7 |
Pins 1 & 2 closed | |
|
Floppy drive interface disabled |
JP7 |
Pins 2 & 3 closed | |
|
Factory configured - do not alter |
JP8 |
Unidentified | |
|
IDE(AT) interface enabled |
JP9 |
Pins 1 & 2 closed | |
|
IDE(AT) interface disabled |
JP9 |
Pins 2 & 3 closed | |
|
Factory configured - do not alter |
JP10 |
Unidentified | |