UNIDENTIFIED
IODE-3292U
| |
Data bus: |
16-bit ISA |
Size: |
Half-length, half-height card |
Hard drive supported: |
Two IDE(AT) drives |
Floppy drives supported: |
Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function |
Location |
40-pin IDE(AT) connector |
CN1 |
34-pin cable connector - floppy drive |
CN2 |
16-pin game port |
CN3 |
10-pin serial port 2 - internal |
CN4 |
9-pin serial port 1 - external, 10-pin serial port 1 - internal |
CN5 |
25-pin parallel port - external |
CN6 |
2-pin connector - drive active LED |
JP1 |
USER CONFIGURABLE SETTINGS | ||
Function |
Location |
Setting |
Floppy drive interface enabled |
JP2/pins 1 & 2 |
closed |
Floppy drive interface disabled |
JP2/pins 2 & 3 |
closed |
Parallel port enabled |
JP3/pins 1 & 2 |
closed |
Parallel port disabled |
JP3/pins 2 & 3 |
closed |
Serial port 1 enabled |
JP4/pins 1 & 2 |
closed |
Serial port 1 disabled |
JP4/pins 2 & 3 |
closed |
Serial port 2 enabled |
JP5/pins 1 & 2 |
closed |
Serial port 2 disabled |
JP5/pins 2 & 3 |
closed |
Game port enabled |
JP6/pins 1 & 2 |
closed |
Game port disabled |
JP6/pins 2 & 3 |
closed |
IDE(AT) interface enabled |
JP7/pins 1 & 2 |
closed |
IDE(AT) interface disabled |
JP7/pins 2 & 3 |
closed |
Parallel port address 378h select |
JP9/pins 1 & 2 |
closed |
Parallel port address 278h select |
JP9/pins 2 & 3 |
closed |
Serial port 1 COM1 (3F8h) select |
JP10/pins 1 & 2 |
closed |
Serial port 1 COM3 (3E8h) select |
JP10/pins 2 & 3 |
closed |
Serial port 2 COM2 (2F8h) select |
JP11/pins 1 & 2 |
closed |
Serial port 2 COM4 (2E8h) select |
JP11/pins 2 & 3 |
closed |
IDE address is 1F0h |
JP12/pins 1 & 2 |
closed |
IDE address is 170h |
JP12/pins 2 & 3 |
closed |
Serial port 1 IRQ4 select |
JP16/pins 1 & 2 |
closed |
Serial port 1 IRQ3 select |
JP16/pins 2 & 3 |
closed |
Serial port 2 IRQ3 select |
JP17/pins 1 & 2 |
closed |
Serial port 2 IRQ4 select |
JP17/pins 2 & 3 |
closed |
MISCELLANEOUS TECHNICAL NOTES |
The purpose of J1 is unidentified. |