UNIDENTIFIED
PCI-MAX
|
| |
|
Data bus: |
32-bit PCI |
|
Size: |
Half-length, full-height card |
|
Hard drive supported: |
Four EIDE drives |
|
Floppy drives supported: |
None |
|
CONNECTIONS | |
|
Function |
Location |
|
40-pin primary IDE(AT) connector |
JP2 |
|
40-pin secondary IDE(AT) connector |
JP3 |
|
4-pin connector - drive active LED |
JP23 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
|
Factory configured - do not alter |
JP6 |
closed | |
|
Factory configured - do not alter |
JP7 |
open | |
|
Note: The number of pins in JP6 is unidentified. | |||
|
BIOS ADDRESS SELECTION | |||
|
Address |
JP4 |
JP5 | |
|
D800h |
pins 2 & 3 closed |
pins 2 & 3 closed | |
|
C800h |
pins 2 & 3 closed |
pins 1 & 2 closed | |
|
D000h |
pins 1 & 2 closed |
pins 2 & 3 closed | |
|
Disabled |
pins 1 & 2 closed |
pins 1 & 2 closed | |
|
Note: The location of pin 1 in JP4 & JP5 is unidentified. | |||
|
PRIMARY IDE PCI INTERRUPT SLECTION | ||||
|
INT |
JP16 |
JP17 |
JP18 |
JP19 |
|
A |
closed |
open |
open |
open |
|
B |
open |
closed |
open |
open |
|
C |
open |
open |
closed |
open |
|
D |
open |
open |
open |
closed |
|
Note: IRQ 14 is used for these settings. | ||||
|
SECONDARY IDE PCI INTERRUPT SLECTION | ||||
|
INT |
JP15 |
JP20 |
JP21 |
JP22 |
|
A |
closed |
open |
open |
open |
|
B |
open |
closed |
open |
open |
|
C |
open |
open |
closed |
open |
|
D |
open |
open |
open |
closed |
|
Note: IRQ 15 is used for these settings. | ||||
|
MISCELLANEOUS TECHNICAL NOTES |
|
BIOS on board is optional. In versions without BIOS the settings for JP4 & JP5 are different. |