UNIDENTIFIED
IDE/FDC MULTI I-O
|
| |
|
Data bus: |
16-bit, ISA |
|
Size: |
Half-length, full-height card |
|
Hard drive supported: |
Two IDE (AT) Interface drives |
|
Floppy drives supported: |
Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
|
CONNECTIONS | |
|
Function |
Location |
|
25 pin parallel port-external |
CN1 |
|
10 pin serial port 1-internal |
CN2 |
|
10 pin serial port 2-internal |
CN3 |
|
40 pin IDE(AT) interface connector |
CN4 |
|
34 pin data cable connector-floppy drive interface |
CN5 |
|
2 pin connector-drive active LED |
LED |
|
USER CONFIGURABLE SETTINGS | |||
|
Purpose |
Jumper |
Setting | |
|
Floppy drive interface enabled |
JP1 |
pins 1 & 2 closed | |
|
Floppy drive interface disabled |
JP1 |
pins 2 & 3 closed | |
|
Parallel port address LPT2 select |
JP2 |
pins 1 & 2 closed | |
|
Parallel port address LPT3 select |
JP2 |
pins 2 & 3 closed | |
|
Serial port 1 address select 3F8h |
JP3 |
pins 1 & 2 closed | |
|
Serial port 1 address select 3E8h |
JP3 |
pins 2 & 3 closed | |
|
Serial port 2 address select 2F8h |
JP4 |
pins 1 & 2 closed | |
|
Serial port 2 address select 2E8h |
JP4 |
pins 2 & 3 closed | |
|
Hard Drive interface enabled |
JP5 |
pins 1 & 2 closed | |
|
Hard Drive interface disabled |
JP5 |
pins 2 & 3 closed | |
|
Factory configured-do not alter |
JP6 |
pins 1 & 2 closed | |