UNIDENTIFIED
CI-171
| |
Data bus: |
16-bit, ISA |
Size: |
Half-length, half-height card |
Hard drive supported: |
Two IDE (AT) interface drives |
Floppy drives supported: |
Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function |
Location |
40-pin IDE (AT) Interface connector |
JP1 |
2-pin connector - drive active LED |
JP2 |
34-pin control cable connector - floppy drive |
JP9 |
Game port |
JP10 |
10-pin serial port 2 - internal |
JP11 |
9-pin serial port 1 - external |
JP12 |
25-pin parallel port |
JP13 |
USER CONFIGURABLE SETTINGS | |||
Function |
Location |
Setting | |
Parallel port is output only |
JP4 |
Closed | |
Parallel port is input only |
JP4 |
Open | |
Floppy drive enabled |
JP6/jumper G |
Closed | |
Floppy drive disabled |
JP6/jumper G |
Open | |
HDD enabled |
JP6/jumper H |
Closed | |
HDD enabled |
JP6/jumper H |
Open |
SERIAL PORT 1 CONFIGURATION - JP6 | |||
COM/Address |
Jumper A |
Jumper B | |
COM1/3F8h |
Closed |
Open | |
COM3/3E8h |
Closed |
Closed | |
COM4/2E8h |
Open |
Closed | |
Disabled |
Open |
Open |
SERIAL PORT 2 CONFIGURATION - JP6 | |||
COM/Address |
Jumper C |
Jumper D | |
COM2/2F8h |
Closed |
Open | |
COM3/3E8h |
Closed |
Closed | |
COM4/2E8h |
Open |
Closed | |
Disabled |
Open |
Open |
SERIAL PORT 1 INTERRUPT SELECT - JP8 | ||||
IRQ |
Jumper A |
Jumper B |
Jumper C | |
IRQ4 |
Closed |
Open |
Open | |
IRQ3 |
Open |
Closed |
Open | |
IRQ5 |
Open |
Open |
Closed | |
Disabled |
Open |
Open |
Open |
SERIAL PORT 2 INTERRUPT SELECT - JP8 | ||||
IRQ |
Jumper D |
Jumper E |
Jumper F | |
IRQ3 |
Closed |
Open |
Open | |
IRQ4 |
Open |
Closed |
Open | |
IRQ5 |
Open |
Open |
Closed | |
Disabled |
Open |
Open |
Open |
PARALLEL PORT CONFIGURATION - JP6 | |||
LPT/Address |
Jumper E |
Jumper F | |
LPT2/378h |
Open |
Closed | |
LPT1/3BCh |
Closed |
Closed | |
LPT3/278h |
Closed |
Open | |
Disabled |
Open |
Open |
PARALLEL PORT INTERRUPT SELECT - JP8 | |||
IRQ |
Jumper G |
Jumper H | |
IRQ7 |
Closed |
Open | |
IRQ5 |
Open |
Closed | |
Disabled |
Open |
Open |