UNIDENTIFIED
SUN-5241
| |
Data bus: |
16-bit, ISA |
Size: |
Half-length, full-height card |
Hard drive supported: |
Two IDE (AT) interface drives |
Floppy drives supported: |
Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function |
Location |
34-pin control cable connector - floppy drive |
CN1 |
40-pin IDE (AT) Interface connector |
CN2 |
Game port |
CN3 |
10-pin serial port 2 - internal |
CN4 |
Game port |
CN5 |
9-pin serial port 1 - external |
CN6 |
2-pin connector - drive active LED |
JP1 |
USER CONFIGURABLE SETTINGS | |||
Function |
Location |
Setting | |
Single speed floppy drive installed |
JP2 |
Open | |
Dual speed floppy drive installed |
JP2 |
Closed | |
IDE I/O Channel Ready signal disabled |
JP3 |
Open | |
IDE I/O Channel Ready signal enabled |
JP3 |
Closed | |
Factory configured - do not alter |
JP5/Jumper B |
N/A | |
Factory configured - do not alter |
JP5/Jumper C |
N/A |
FLOPPY DRIVE | |||
Setting |
JP4 |
JP8 | |
Enabled |
Pins 2 & 3 closed |
Closed | |
Disabled |
Pins 1 & 2 closed |
Open |
SERIAL PORT 1 CONFIGURATION - JP6 | ||||
COM |
Jumper C |
Jumper D |
Jumper E | |
COM1 |
Closed |
Open |
Open | |
COM2 |
Open |
Closed |
Open | |
Disabled |
Open |
Open |
Closed |
SERIAL PORT 2 CONFIGURATION - JP5 | |||
COM |
Jumper A |
Jumper D | |
COM2 |
Open |
Closed | |
Disabled |
Closed |
Open |
SERIAL PORT 1 INTERRUPT SELECT - JP7 | |||
IRQ |
Jumper B |
Jumper D | |
IRQ4 |
Open |
Closed | |
IRQ3 |
Closed |
Open | |
Disabled |
Open |
Open |
SERIAL PORT 2 INTERRUPT SELECT - JP7 | |||
IRQ |
Jumper A |
Jumper C | |
IRQ3 |
Open |
Closed | |
IRQ4 |
Closed |
Open | |
Disabled |
Open |
Open |
PARALLEL PORT CONFIGURATION - JP6 | |||
LPT |
Jumper A |
Jumper B | |
LPT1 |
Closed |
Open | |
LPT2 |
Open |
Closed | |
Disabled |
Open |
Open |
PARALLEL PORT INTERRUPT SELECT - JP7 | |||
IRQ |
Jumper E |
Jumper F | |
IRQ7 |
Open |
Closed | |
IRQ5 |
Closed |
Open | |
Disabled |
Open |
Open |