UNIDENTIFIED
VLS-6360
Data Bus: |
VESA local bus |
Size: |
Mid-length, full-height card |
Hard drives supported: |
SCSI up to 7 drives |
Floppy drives supported: |
Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function |
Location |
50-pin SCSI External port |
CN1 |
50-pin SCSI internal port |
CN2 |
34-pin data cable connector-floppy drive |
CN3 |
4-pin connector-drive active LED |
CN4 |
Terminating Resistor 1 |
RN1 |
Terminating Resistor 2 |
RN2 |
Terminating Resistor 3 |
RN3 |
USER CONFIGURABLE SETTINGS | |||
Function |
Location |
Setting | |
Port Address 340h |
SW1/1 |
on | |
Port Address 140h |
SW1/1 |
off | |
BIOS enabled |
SW1/2 |
on | |
BIOS disabled |
SW1/2 |
off |
USER CONFIGURABLE SETTINGS | ||||
Function |
Location |
Setting | ||
BIOS support for Floptical/SCSI floppy disabled |
SW1/7 |
off | ||
BIOS support for Floptical/SCSI floppy enable |
SW1/7 |
on | ||
6360 Feature Bit disabled |
SW1/8 |
off | ||
6360 Feature Bit enabled |
SW1/8 |
on | ||
Negotiation enabled |
SW1/9 |
on | ||
Negotiation disabled |
SW1/9 |
off | ||
Disconnect enabled |
SW1/10 |
on | ||
Disconnect disabled |
SW1/10 |
off | ||
Floppy drive enabled |
JP5 |
closed | ||
Floppy drive disabled |
JP5 |
open | ||
Standard SCSI drive type |
JP8 |
open | ||
Hard drive >1Gb or Floptical |
JP8 |
closed | ||
Note 1: SW1/7 & SW1/8 have no meaning under BIOS version 1.01L 2:A later version of the BIOS will support the SW1/7 & SW1/8 option. If SW1/7 is set to (On) and the BIOS is later than 1.01L then SW1/8 must be set to (On) for the SW1/7 option to work. |
BIOS PORT ADDRESS SETTING | |||
Setting |
SW1/3 |
SW1/4 | |
DC000h |
on |
on | |
D8000h |
off |
on | |
CC000h |
on |
off | |
C8000h |
off |
off |
INTERRUPT SELECT | |||||||
Setting |
JP4/A |
JP4/B |
JP4/C |
JP4/D |
SW1/5 |
SW1/6 | |
IRQ11 |
open |
open |
closed |
open |
off |
on | |
IRQ9 |
closed |
open |
open |
open |
off |
off | |
IRQ10 |
open |
closed |
open |
open |
on |
off | |
IRQ12 |
open |
open |
open |
closed |
on |
on |