UNIDENTIFIED
CCAT100A/200A
|
| |
|
Data bus: |
16-bit ISA |
|
Size: |
Three-quarter length, half-height card |
|
Hard drive supported: |
Two IDE(AT) interface drives |
|
Floppy drives supported: |
360KB, 720KB, 1.2MB, 1.44MB |
|
CONNECTIONS | |
|
Function |
Location |
|
4-pin connector - drive active LED |
J1 |
|
40-pin IDE(AT) interface connector |
J2 |
|
34-pin control cable connector - floppy drive |
J3 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
|
Unbuffered IRQ14 enabled |
W1 |
pins 3 & 4 closed | |
|
Buffered IRQ14 enabled |
W1 |
pins 1 & 2 closed | |
|
Floppy drive interface enabled |
W2 |
pins 1 & 2 closed | |
|
Floppy drive interface disabled |
W2 |
pins 1 & 2 open | |
|
Floppy drive interface is primary adapter |
W2 |
pins 3 & 4 open | |
|
Floppy drive interface is secondary adapter |
W2 |
pins 3 & 4 closed | |
|
Single speed floppy drive interface enabled |
W3 |
open | |
|
Dual speed floppy drive interface enabled |
W3 |
closed | |