UNIDENTIFIED
SUPER IDE MODEL 827 VER. 11
|
| |
|
Data bus: |
16-bit, ISA |
|
Size: |
Half-length, full-height card |
|
Hard drive supported: |
Two IDE (AT) Interface drives |
|
Floppy drives supported: |
Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
|
CONNECTIONS | |
|
Function |
Location |
|
15-pin game port - internal |
CN1 |
|
40-pin IDE (AT) Interface connector |
CN2 |
|
34-pin control cable connector - floppy drive |
CN3 |
|
10-pin serial port (COM2/4) - internal |
CN4 |
|
10-pin serial port (COM1/3) - internal |
CN5 |
|
25-pin parallel port (LPT1/2) - external |
CN6 |
|
4-pin connector - drive active LED |
JP1 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
|
Serial Port 1 (CN5) enabled |
JP2 |
pins 1 & 2 closed | |
|
Serial Port 1 (CN5) disabled |
JP2 |
pins 2 & 3 closed | |
|
Game Port (CN1) enabled |
JP3 |
pins 1 & 2 closed | |
|
Game Port (CN1) disabled |
JP3 |
pins 2 & 3 closed | |
|
Floppy drive enabled |
JP4 |
pins 1 & 2 closed | |
|
Floppy drive disabled |
JP4 |
pins 2 & 3 closed | |
|
Parallel Port (CN6) address is 378h (LPT1) |
JP5 |
pins 1 & 2 closed | |
|
Parallel Port (CN6) address is 278h (LPT2) |
JP5 |
pins 2 & 3 closed | |
|
Serial Port 1 (CN5) is set to COM1 (3F8h) |
JP6 |
pins 1 & 2 closed | |
|
Serial Port 1 (CN5) is set to COM3 (3E8h) |
JP6 |
pins 2 & 3 closed | |
|
Serial Port 2 (CN4) enabled |
JP7 |
pins 1 & 2 closed | |
|
Serial Port 2 (CN4) disabled |
JP7 |
pins 2 & 3 closed | |
|
Serial Port 2 (CN4) is set to COM2 (2F8h) |
JP8 |
pins 1 & 2 closed | |
|
Serial Port 2 (CN4) is set to COM4 (2E8h) |
JP8 |
pins 2 & 3 closed | |
|
I/O Channel Ready signal disabled |
JP9 |
open | |
|
I/O Channel Ready signal enabled |
JP9 |
closed | |