WYSE TECHNOLOGY, INC
WY-964
|
| |
|
Data bus: |
16-bit, ISA |
|
Size: |
Half-length, full-height card |
|
Hard drive supported: |
Two IDE (AT) Interface drives |
|
Floppy drives supported: |
Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
|
CONNECTIONS | |
|
Function |
Location |
|
40-pin IDE(AT) Interface connector |
CN1 |
|
34-pin control cable connector - floppy drive |
CN2 |
|
10-pin serial port (COM2/4) - internal |
CN3 |
|
10-pin serial port (COM1/3) - external |
CN4 |
|
25-pin parallel port (LPT1/2) - external |
CN5 |
|
4-pin connector - Drive active LED |
JP1 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
|
Index address 398, Data address 399 enabled |
JP7 |
pins 1 & 2 closed | |
|
Index address 26E, Data address 26F enabled |
JP7 |
pins 2 & 3 closed | |
|
MISCELLANEOUS TECHNICAL NOTES |
|
Jumpers JP2, JP3, JP4, JP5, JP6, JP9, and JP11 are factory configured to pins 1 & 2 closed; JP8 and JP10 are factory configured to pins 2 & 3 closed - do not alter. |