UNIDENTIFIED
M5105 (A4 MINI SUPER IDE)
|
| |
|
Data bus: |
16-bit, ISA |
|
Size: |
Half-length, half-height card |
|
Hard drive supported: |
Two IDE (AT) Interface drives |
|
Floppy drives supported: |
Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
|
CONNECTIONS | |
|
Function |
Location |
|
2-pin connector - Drive active LED |
JP1 |
|
40-pin IDE(AT) Interface connector |
JP2 |
|
34-pin control cable connector - floppy drive |
JP3 |
|
15-pin game port - internal |
JP8 |
|
10-pin serial port (COM1/2/3) - internal |
JP9 |
|
10-pin serial port (COM2/3/4) - internal |
JP10 |
|
25-pin parallel port (LPT1/2/3) - external |
JP11 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
|
Hard drive enabled |
JP4 & JP5 |
closed | |
|
Hard drive disabled |
JP4 & JP5 |
open | |
|
Floppy drive enabled |
JP17 |
pins 1 & 2 closed | |
|
Floppy drive disabled |
JP17 |
pins 2 & 3 closed | |
|
SERIAL PORT (JP9 & JP10) CONFIGURATION | ||||
|
JP9 |
JP10 |
Jumper JP6 |
Jumper JP7 | |
|
COM1 |
COM2 |
pins 1 & 2 closed |
pins 1 & 2 closed | |
|
COM1 |
COM4 |
pins 1 & 2 closed |
pins 2 & 3 closed | |
|
COM3 |
COM4 |
pins 2 & 3 closed |
pins 1 & 2 closed | |
|
COM2 |
COM3 |
pins 2 & 3 closed |
pins 2 & 3 closed | |
|
PARALLEL PORT (JP11) CONFIGURATION | ||
|
JP11 |
Jumper JP12 |
Jumper JP13 |
|
LPT2 enabled |
pins 1 & 2 closed |
pins 1 & 2 closed |
|
LPT1 enabled |
pins 1 & 2 closed |
pins 2 & 3 closed |
|
LPT3 enabled |
pins 2 & 3 closed |
pins 1 & 2 closed |
|
Disabled |
pins 2 & 3 closed |
pins 2 & 3 closed |