UNIDENTIFIED
MIO/16 CARD
|
| |
|
Data bus: |
16-bit, ISA |
|
Size: |
Half-length, full-height card |
|
Hard drive supported: |
Two IDE(AT) Interface drives |
|
Floppy drives supported: |
Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
|
CONNECTIONS | |
|
Function |
Location |
|
40-pin IDE(AT) Interface connector |
CN1 |
|
34-pin control cable connection - floppy drive |
CN2 |
|
16-pin game port - internal |
CN3 |
|
10-pin serial port 2 - internal |
CN4 |
|
10-pin serial port 1 - external |
CN5 |
|
25-pin parallel port (LPT1/2) - external |
CN6 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
|
Factory Configured - do not alter |
JP1 |
- | |
|
IRQ14 without active control output |
JP2 |
pins 2 & 3 closed | |
|
IRQ14 with active control output |
JP2 |
pins 1 & 2 closed | |
|
Parallel port set to LPT2 |
JP3 |
pins 2 & 3 closed | |
|
Parallel port set to LPT3 |
JP3 |
pins 1 & 2 closed | |
|
Serial port 1 set to COM1, Serial port 2 set to COM2 |
JP4 |
pins 2 & 3 closed | |
|
Serial port 1 set to COM3, Serial port 2 set to COM4 |
JP4 |
pins 1 & 2 closed | |
|
Hard drive enabled |
JP5 |
pins 2 & 3 closed | |
|
Hard drive disabled |
JP5 |
pins 1 & 2 closed | |
|
Serial port 1 set to IRQ4 |
JP6 |
closed | |
|
Serial port 2 set to IRQ3 |
JP6A |
closed | |
|
Parallel port interrupt is IRQ7 |
JP7 |
pins 2 & 3 closed | |
|
Parallel port interrupt is IRQ5 |
JP7 |
pins 1 & 2 closed | |
|
MISCELLANEOUS TECHNICAL NOTES |
|
The alternative Serial Port IRQs (JP6 and JP6A) are unknown |