PINE TECHNOLOGY
PT-604
|
Data bus: 16-bit, ISA
Size: Half-length, full-height card
Hard drives supported: Two IDE (AT) Interface drives
Floppy drives supported: Two 360KB, 720KB, 1.2MB or 1.44MB drives
CONNECTIONS | |
Function |
Location |
9-pin serial port 1 (COM1/3)-internal |
CN1 |
25-pin parallel port (LPT1/2)-external |
CN2 |
40-pin AT Interface (IDE) connector-internal |
CN3 |
34-pin control cable connector-floppy drive |
CN4 |
16-pin game port-internal |
CN5 |
9-pin serial port 2 (COM2/4)-internal |
CN6 |
4-pin connector-drive active LED |
CN7 |
USER CONFIGURABLE SETTINGS | |||
Function |
Location |
Setting | |
Floppy drive controller enabled |
JP1 |
pins 1 & 2 closed | |
Floppy drive controller disabled |
JP1 |
pins 2 & 3 closed | |
Hard drive port address is 1F0-1F7h |
JP2 |
pins 1 & 2 closed | |
Hard drive port address is 170-177h |
JP2 |
pins 2 & 3 closed | |
Floppy drive port address is 3F1-3F7h |
JP3 |
pins 1 & 2 closed | |
Floppy drive port address is 371-377h |
JP3 |
pins 2 & 3 closed | |
Hard drive controller enabled |
JP4 |
pins 1 & 2 closed | |
Hard drive controller disabled |
JP4 |
pins 2 & 3 closed | |
Parallel Port (CN2) is set to LPT1 (378h) |
JP5 |
pins 1 & 2 closed | |
Parallel Port (CN2) is set to LPT2 (278h) |
JP5 |
pins 2 & 3 closed | |
Serial Port 1 (CN1) is set to COM1 (3F8h) |
JP6 |
pins 1 & 2 closed | |
Serial Port 1 (CN1) is set to COM3 (3E8h) |
JP6 |
pins 2 & 3 closed | |
Serial Port 2 (CN6) is set to COM2 (2F8h) |
JP7 |
pins 1 & 2 closed | |
Serial Port 2 (CN6) is set to COM4 (2E8h) |
JP7 |
pins 2 & 3 closed | |
Serial Port 2 (CN6) is enabled |
JP8 |
pins 1 & 2 closed | |
Serial Port 2 (CN6) is disabled |
JP8 |
pins 2 & 3 closed | |
Serial Port 1 (CN1) is enabled |
JP9 |
pins 1 & 2 closed | |
Serial Port 1 (CN1) is disabled |
JP9 |
pins 2 & 3 closed | |
Parallel Port (CN2) enabled |
JP10 |
pins 1 & 2 closed | |
Parallel Port (CN2) disabled |
JP10 |
pins 2 & 3 closed | |
Floppy drive controller enabled |
JP11 |
pins 2 & 3 closed | |
Floppy drive controller disabled |
JP11 |
pins 1 & 2 closed | |
Game Port (CN5) enabled |
JP14 |
pins 1 & 2 closed | |
Game Port (CN5) disabled |
JP14 |
pins 2 & 3 closed |