STORAGE DIMENSIONS
SDC3211B
|
Card Type |
Hard drive controller |
|
Maximum On Board Memory |
N/A |
|
Hard Drives Supported |
Up to 7 SCSI-1 devices |
|
Floppy Drives Supported |
None |
|
Data Bus |
MCA |
|
Card Size |
Full length, half height |
|
CONNECTIONS | |||
|
Function |
Location |
Function |
Location |
|
50-pin SCSI connector - external |
CN1 |
DC power connector |
CN3 |
|
50-pin SCSI connector - internal |
CN2 | ||
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Label |
Position | |
|
Factory configured - do not alter |
W4 |
Unidentified | |
|
Note:Number of pins of W4 is unidentified. | |||
|
DIAGNOSTIC LED | ||
|
Color |
Status |
Condition |
|
Unidentified |
On |
Terminators missing |
|
Unidentified |
1 flash |
EPROM failure |
|
Unidentified |
2 flashes |
Local RAM failure |
|
Unidentified |
3 flashes |
SCSI chip or interface failure |
|
Unidentified |
4 flashes |
Internal data bus failure |
|
Unidentified |
5 flashes |
Internal address bus failure |
|
Unidentified |
6 flashes |
Bus master chip failure |
|
Unidentified |
Blinking |
Fuse blown |
|
MISCELLANEOUS TECHNICAL NOTES |
|
Remove terminating resistors only when connecting external and internal devices at the same time. |