STORAGE DIMENSIONS
LANSTOR EISA RAIDCARD
|
Card Type |
Hard drive controller |
|
Processor |
Unidentified |
|
Chipset: |
Unidentified |
|
Maximum On Board Memory |
32MB |
|
Hard Drives Supported |
Up to 7 SCSI-2 Fast devices |
|
Up to 7 SCSI-2 Wide devices | |
|
Floppy Drives Supported |
None |
|
Data Bus |
32-bit EISA |
|
Card Size |
Full length, full height |
|
Raid Levels Supported |
0, 1, 3, 5, 6, 7 |
|
MAINBOARD CONNECTIONS | |||
|
Function |
Location |
Function |
Location |
|
2-pin connector - status LED |
J2 |
68-pin SCSI Wide connector - internal |
P3 |
|
2-pin connector - EISA activity LED |
J3 |
50-pin SCSI Fast connector - internal |
P4 |
|
2-pin connector - SCSI activity LED |
J5 |
SCSI connector - external |
P5 |
|
Daughter board connector |
P2 | ||
|
DAUGHTER BOARD CONNECTIONS | |||
|
Function |
Location |
Function |
Location |
|
Optional power connector for SCSI terminators |
J2 |
68-pin SCSI Wide connector - internal |
P2 |
|
Main board connector |
P1 |
50-pin SCSI Fast connector - internal |
P3 |
|
Note:Diagram not available for daughter board. | |||
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Label |
Position | |
|
MAIN BOARD SETTINGS | |||
|
Factory configured - do not alter |
J1 |
Closed | |
|
Factory configured - do not alter |
J4 |
Open | |
|
Factory configured - do not alter |
J6 |
Open | |
|
Factory configured - do not alter |
J7 |
Pins 2 & 3 closed | |
|
Note:Location of J1 and J4 is unidentified. | |||
|
USER CONFIGURABLE SETTINGS (CONT) | |||
|
Function |
Label |
Position | |
|
DAUGHTER BOARD SETTINGS | |||
|
Factory configured - do not alter |
J1 |
Unidentified | |
|
Termination enabled |
J3 |
Closed | |
|
Termination disabled |
J3 |
Open | |
|
TERMINATION POWER SELECTION | ||
|
Setting |
J8 | |
|
TERMPWR supplied to SCSI interface |
Closed | |
|
DRAM CONFIGURATION | |
|
Size |
Bank 0 |
|
4MB |
(4) 1M x 9 |
|
16MB |
(4) 4M x 9 |
|
32MB |
(4) 8M x 9 |