SINACOM
SUPER I/O CARD
Data bus: |
16-bit ISA |
Size: |
Half-length, full-height card |
Hard drive supported: |
Two IDE(AT) drives |
Floppy drives supported: |
Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function |
Location |
40-pin IDE(AT) connector |
CN1 |
34-pin cable connector - floppy drive |
CN2 |
16-pin game port |
CN3 |
10-pin serial port 2 - internal |
CN4 |
9-pin serial port 1 - external |
CN5 |
25-pin parallel port - external |
CN6 |
Drive active LED (size is unidentified) |
CN7 |
USER CONFIGURABLE SETTINGS | |||
Function |
Location |
Setting | |
|
Serial port 1 is COM1 (3F8h) |
JP1/pins 1 & 2 |
closed |
|
Serial port 1 is COM3 (3E8h) |
JP1/pins 2 & 3 |
closed |
|
Serial port 2 is COM2 (2F8h) |
JP2/pins 1 & 2 |
closed |
|
Serial port 2 is COM4 (2E8h) |
JP2/pins 2 & 3 |
closed |
|
Floppy drive interface enabled |
JP3/pins 1 & 2 |
closed |
|
Floppy drive interface disabled |
JP3/pins 2 & 3 |
closed |
|
Game port enabled |
JP4/pins 1 & 2 |
closed |
|
Game port disabled |
JP4/pins 2 & 3 |
closed |
|
Parallel port is LPT1 (378h) |
JP5/pins 1 & 2 |
closed |
|
Parallel port is LPT2 (278h) |
JP5/pins 2 & 3 |
closed |
|
Parallel port IRQ 7 select |
JP6/pins 1 & 2 |
closed |
|
Parallel port IRQ 5 select |
JP6/pins 2 & 3 |
closed |
MISCELLANEOUS TECHNICAL NOTES |
Pin 1 in the JP jumper block is unidentified. |