TMC RESEARCH CORPORATION
IFSPVL (VER. 2A)
|
| |
|
Data bus: |
32-bit, VL-Bus |
|
Size: |
Three/quarter-length, full-height card |
|
Hard drive supported: |
Two IDE (AT) interface drives |
|
Floppy drives supported: |
Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
|
CONNECTIONS | |
|
Function |
Location |
|
40-pin IDE(AT) interface connector |
J1 |
|
34-pin control cable connector - floppy drive |
J2 |
|
16-pin game port - internal |
J3 |
|
10-pin serial port (COM2/4) - internal |
J4 |
|
9-pin serial port (COM1/3) - external |
J5 |
|
25-pin parallel port (LPT1/2) - external |
J6 |
|
4-pin connector - Drive active LED |
JP1 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
|
IDE(AT) controller enabled |
JP2 |
closed | |
|
IDE(AT) controller disabled |
JP2 |
open | |
|
CPU is 386DX |
JP3 |
open | |
|
CPU is 486 (SX, DX, DX2, Overdrive, 487SX, P24T) |
JP3 |
closed | |
|
Floppy controller enabled |
JP4 |
closed | |
|
Floppy controller disabled |
JP4 |
open | |
|
Game port enabled |
JP5 |
closed | |
|
Game port disabled |
JP5 |
open | |
|
Parallel port (J6) is LPT1 |
RNG |
pins 2-5 closed | |
|
Parallel port (J6) is LPT2 |
RNG |
pins 1-4 closed | |
|
Parallel port disabled |
RNG |
pins 4-7 closed | |
|
Note: RNG is configured by installing a 4-pin resistor network over the corresponding pins. | |||
|
SERIAL PORTS CONFIGURATIONS | ||
|
Port 1 (J5) |
Port 2 (J4) |
RNH |
|
COM1 |
COM2 |
pins 1-4 closed |
|
COM1 |
disabled |
pins 2-5 closed |
|
disabled |
COM2 |
pins 3-6 closed |
|
disabled |
disabled |
pins 4-7 closed |
|
Note: RNH is configured by installing a 4-pin resistor network over the corresponding pins. | ||