TEKRAM TECHNOLOGY CO., LTD.
DC-800
|
| |
|
Data bus: |
16-bit, ISA |
|
Size: |
Full-length, full-height card |
|
Hard drive supported: |
Up to seven SCSI devices |
|
Floppy drives supported: |
Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
|
CONNECTIONS | |
|
Function |
Location |
|
50-pin SCSI connector - external |
CN1 |
|
50-pin SCSI connector - internal |
CN2 |
|
34-pin control cable connector - floppy drive |
CN3 |
|
4-pin connector - drive active LED |
JP1 |
|
4-pin connector - diagnostic Cache speaker |
JP2 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
|
Floppy drive enabled |
JP3/jumper 1 |
closed | |
|
Floppy drive disabled |
JP3/jumper 1 |
open | |
|
I/O PORT ADDRESS | ||||
|
Address |
JP3/jumper 2 |
JP3/jumper 3 |
JP3/jumper 4 | |
|
330h |
closed |
closed |
closed | |
|
334h |
closed |
open |
closed | |
|
230h |
open |
closed |
closed | |
|
234h |
open |
closed |
open | |
|
130h |
open |
open |
closed | |
|
134h |
open |
open |
open | |
|
MISCELLANEOUS TECHNICAL NOTES |
|
At least one pair of SIMM memory modules (256KB, 1MB, or 4MB) of the same size must be installed in Bank 0 in order for the controller to function. |