TEKRAM TECHNOLOGY CO., LTD.
DC-820
|
| |
|
Data bus: |
32-bit, EISA |
|
Size: |
Full-length, full-height card |
|
Hard drive supported: |
Up to seven SCSI devices |
|
Floppy drives supported: |
Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
|
CONNECTIONS | |
|
Function |
Location |
|
50-pin SCSI connector - external |
CN1 |
|
50-pin SCSI connector - internal |
CN2 |
|
34-pin control cable connector - floppy drive |
CN3 |
|
4-pin connector - drive active LED |
JP1 |
|
4-pin connector - cache error speaker |
JP2 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
|
Floppy drive enabled |
JP3 |
closed | |
|
Floppy drive disabled |
JP3 |
open | |
|
DRIVE ACTIVE LED ERROR CODES (IMMEDIATELY AFTER POWER-UP) | |
|
Status |
Function |
|
One short flash |
DC-820 CPU error |
|
Two short flashes |
SCSI chip error |
|
Three short flashes |
BMIC (EISA bus) chip error |
|
Four short flashes |
SRAM error |
|
Five short flashes |
EPROM checksum error |
|
MISCELLANEOUS TECHNICAL NOTES |
|
All four sockets of Bank 0 must be filled with SIMMs of the same size - 256KB, 1MB, or 4MB. |