SILICON VALLEY COMPUTER, INC.
ADP20F
|
| |
|
Data bus: |
16-bit, ISA |
|
Size: |
Half-length, full-height card |
|
Hard drive supported: |
Two IDE (AT) Interface drives |
|
Floppy drives supported: |
Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
|
CONNECTIONS | |
|
Function |
Location |
|
34-pin control cable connector-floppy drive |
P1 |
|
40-pin AT Interface (IDE) connector |
P2 |
|
4-pin connector-Drive active LED |
P6 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
|
Floppy drive enabled |
E1, E6, E7 |
closed | |
|
Floppy drive disabled |
E1, E6, E7 |
open | |
|
Floppy drive change signal enabled |
E2 |
closed | |
|
Floppy drive change signal disabled |
E2 |
open | |
|
Floppy drive precompensation is 125ns |
E3 |
open | |
|
Floppy drive precompensation is 187ns |
E3 |
closed | |
|
Single speed floppy drives supported |
E4 |
open | |
|
Dual speed floppy drives supported |
E4 |
closed | |
|
Older Conner hard drives not supported |
E5 |
open | |
|
Older Conner hard drives supported |
E5 |
closed | |