Q LOGIC CORPORATION
QLA 1240D
|
Card Type |
Hard drive controller card |
|
Chip Set |
Unidentified |
|
Maximum Onboard Memory |
Unidentified |
|
Hard Drives supported |
Up to 30 SCSI-2 Fast/Wide/Differential devices, |
|
Floppy drives supported |
None |
|
Data Bus |
32-bit PCI |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
68-pin SCSI connector - external |
J1 |
LED connector |
J4 |
|
68-pin SCSI connector - external |
J2 | ||
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Label |
Position | |
|
Factory configured - do not alter (BIOS bank) |
JP1 |
Closed | |
|
Factory configured - do not alter (BIOS bank) |
JP2 |
Closed | |
|
TERMINATION CONFIGURATION | ||
|
Connector |
Controller Position |
Termination Required |
|
J1 |
At end of SCSI bus |
Internal host terminators RM9, RM11 & RM15 removed |
|
J1 |
Not at end of SCSI bus |
Internal host terminators RM9-RM6 removed |
|
J2 |
At end of SCSI bus |
Internal host terminators RM1, RM7 & RM8 removed |
|
J2 |
Not at end of SCSI bus |
Internal host terminators RM1-RM8 removed |