PROMISE TECHNOLOGY, INC.
DC5030D
Card Type |
Hard drive controller |
Hard Drives supported |
Four IDE (AT) drives |
Floppy drives supported |
None |
Data Bus |
32-bit PCI |
Card Size |
Half-length, full-height |
CONNECTIONS | |||
Function |
Location |
Function |
Location |
40-pin primary IDE(AT) connector |
J1 |
Mini ISA IRQ support card connector |
JP1 |
40-pin secondary IDE(AT) connector |
J2 |
4-pin connector - drive active LED |
JP5 |
JP1 CONNECTOR PIN-OUT | |||
Pin # |
Function |
Pin # |
Function |
1 - 3 |
Unidentified |
5 |
IRQ15 |
4 |
IRQ14 |
6 - 14 |
Unidentified |
USER CONFIGURABLE SETTINGS | ||
Function |
Label |
Position |
PCI INT (A - D) enabled |
JP2 |
Closed |
PCI INT (A - D) disabled |
JP2 |
Open |
Relocatable I/O address disabled |
JP3/A |
Pins 1 & 2 closed |
Relocatable I/O address enabled |
JP3/A |
Pins 2 & 3 closed |
Primary IDE (AT) interface enabled |
JP3/C |
Pins 2 & 3 closed |
Secondary IDE (AT) interface enabled |
JP3/C |
Pins 1 & 2 closed |
Connection to ISA IRQ14 enabled |
JP3/D |
Pins 1 & 2 closed |
Connection to ISA IRQ15 enabled |
JP3/D |
Pins 2 & 3 closed |
CACHE MEMORY CONFIGURATION | ||
Size |
Bank 0 |
Bank 1 |
Unidentified |
Unidentified |
Unidentified |
BIOS ADDRESS SELECTION | |
Address |
JP3/B |
D8000h |
Pins 1 & 2 closed |
DC000h |
Pins 2 & 3 closed |
PCI INTERRUPT SELECTION | |
Setting |
JP4 |
INTA |
Pins 1 & 3 closed |
INTB |
Pins 3 & 5 closed |
INTC |
Pins 2 & 4 closed |
INTD |
Pins 4 & 6 closed |
Note:You can only use one INT at a time. |