IPTool.net.ua IPTools.net.ua

PI-350 PC

PROCOMP USA, INC.

PI-350 PC

Data bus:

32-bit PCI

Size:

Half-length, full-height card

Hard drive supported:

Up to seven normal SCSI-2 or fifteen SCSI-3 Wide devices

Floppy drives supported:

None

   

CONNECTIONS

Function

Location

50-pin SCSI connector - internal

H1

4-pin connector - drive active LED

J20

50-pin SCSI connector - external

SC1

68-pin SCSI Wide connector - internal

SC2

USER CONFIGURABLE SETTINGS

Function

Location

Setting

PCI INT A select

JH1

Pins 1 & 2 closed

 

PCI INT B select

JH1

Pins 3 & 4 closed

 

PCI INT C select

JH1

Pins 5 & 6 closed

 

PCI INT D select

JH1

Pins 7 & 8 closed

TERMINATION SELECTION

Standard SCSI Terminators

Wide SCSI Terminator

H10

H11

Software configured

Software configured

Closed

Closed

Software configured

Hardware configured

Closed

Open

Hardware configured

Software configured

Open

Closed

Hardware configured

Hardware configured

Open

Open

TERMINATION CONFIGURATION

SCSI Configuration

External Devices Internal Devices

JH2/pins 1 & 2

JH2/pins 3 & 4

None

Standard

Open

Closed

None

Wide

Open

Open

Standard

None

Open

Closed

Standard

Standard

Closed

Closed

None

Standard & Wide

Closed

Open

Standard

Wide

Closed

Open

Note: Opening JH2/pins 1 & 2 enables standard SCSI terminators. Opening JH2/pins 3 & 4 enables

SCSI-Wide terminator. Please see Miscellaneous Technical Notes.

MISCELLANEOUS TECHNICAL NOTES

The standard SCSI terminators terminate data bits 0-7 on the SCSI bus. The SCSI-wide terminator terminates data bits 8-15 (wide portion) on the bus.

Maximum use of two SCSI connectors is recommended. This means devices should be chained off connectors SC1 & H1, SC1 & SC2 or SC2 & H1, but not all three.