PROMISE TECHNOLOGY, INC.
DC4030VL
|
| |
|
Data bus: |
32-bit, VL-bus |
|
Size: |
Three/quarter-length, full-height card |
|
Hard drive supported: |
Four IDE (AT) Interface drives |
|
Floppy drives supported: |
Four 360KB, 720KB, 1.2MB, 1.44MB, or 2.88MB drives |
|
CONNECTIONS | |
|
Function |
Location |
|
34-pin control cable connector - floppy drive BUS-0 |
J1 |
|
34-pin control cable connector - floppy drive BUS-1 |
J2 |
|
40-pin IDE (AT) Interface connector IDE-0 |
J3 |
|
40-pin IDE (AT) Interface connector IDE-1 |
J4 |
|
4-pin connector - drive active LED |
JP1 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
|
Floppy drive enabled |
JP2 |
Closed | |
|
Floppy drive disabled |
JP2 |
Open | |
|
VL-bus ID3 signal support enabled* |
JP4 |
Closed | |
|
VL-bus ID3 signal support disabled* |
JP4 |
Open | |
|
*Note: Open JP4 if your motherboard is 50MHz 486 and does not support ID3 signal. | |||
|
MISCELLANEOUS TECHNICAL NOTES |
|
At least one pair SIMM of memory modules (256KB, 1MB, or 4MB) of the same size must be installed in Bank 0 in order for the controller to function. |