PINE TECHNOLOGY
PT-611
|
| |
|
Data bus: |
16-bit, ISA |
|
Size: |
Half-length, half-height card |
|
Hard drive supported: |
Two IDE (AT) Interface drives |
|
Floppy drives supported: |
Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
|
CONNECTIONS | |
|
Function |
Location |
|
40-pin IDE(AT) Interface connector |
IDE |
|
2-pin connector - Drive active LED |
CN2 |
|
34-pin control cable connector - floppy drive |
FDD |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
|
I/O Channel Ready signal disabled |
JP1 |
pins 1 & 2 closed | |
|
I/O Channel Ready signal enabled |
JP1 |
pins 2 & 3 closed | |
|
Hard drive enabled |
JP2 |
pins 1 & 2 closed | |
|
Hard drive disabled |
JP2 |
pins 2 & 3 closed | |
|
Floppy drive enabled |
JP3 |
pins 1 & 2 closed | |
|
Floppy drive disabled |
JP3 |
pins 2 & 3 closed | |
|
Floppy drive booting sequence is A:/B: |
JP4 |
pins 1 & 2 closed | |
|
Floppy drive booting sequence is B:/A: |
JP4 |
pins 2 & 3 closed | |
|
Floppy drive port address is 3F0-3F7h |
JP5 |
pins 1 & 2 closed | |
|
Floppy drive port address is 370-377h |
JP5 |
pins 2 & 3 closed | |
|
Hard drive port address is 1F0-1F7h |
JP6 |
pins 1 & 2 closed | |
|
Hard drive port address is 170-177h |
JP6 |
pins 2 & 3 closed | |