PROMISE TECHNOLOGY, INC.
DC100, DC100M
| |
Data bus: |
16-bit, ISA |
Size: |
Half-length, full-height card |
Hard drive supported: |
Two IDE (AT) Interface drives |
Floppy drives supported: |
Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function |
Location |
9-pin serial port 1-external |
CN1 |
25-pin parallel port-external |
CN2 |
34-pin control cable connector-floppy drive |
J1 |
40-pin IDE control cable connector-internal |
J2 |
9-pin serial port 2-internal |
JP1 |
4-pin connector-drive active LED |
JP4 |
USER CONFIGURABLE SETTINGS | |||
Function |
Location |
Setting | |
Parallel port is output |
JP2 |
closed | |
Parallel port is bi-direction |
JP2 |
open | |
Floppy drive enabled |
JP3/jumper 8 |
pins 1 & 2 closed | |
Floppy drive disabled |
JP3/jumper 8 |
pins 2 & 3 closed |
SERIAL PORT 1 CONFIGURATION | |||
Port 1 (CN5) |
JP3/jumper 1 |
JP3/jumper 2 | |
COM1 (3F8) - IRQ4 |
pins 1 & 2 closed |
pins 2 & 3 closed | |
COM3 (3E8) - IRQ4 |
pins 2 & 3 closed |
pins 1 & 2 closed | |
Disabled |
pins 2 & 3 closed |
pins 2 & 3 closed |
SERIAL PORT 2 CONFIGURATION | |||
Port 2 (CN3) |
JP3/jumper 3 |
JP3/jumper 4 | |
COM2 (2F8h) - IRQ3 |
pins 1 & 2 closed |
pins 2 & 3 closed | |
COM4 (2E8h) - IRQ3 |
pins 2 & 3 closed |
pins 1 & 2 closed | |
Disabled |
pins 2 & 3 closed |
pins 2 & 3 closed |
PARALLEL PORT CONFIGURATION | ||
LPT |
JP3/jumper 4 |
JP3/jumper 5 |
LPT1 enabled |
pins 2 & 3 closed |
pins 2 & 3 closed |
LPT2 enabled |
pins 1 & 2 closed |
pins 2 & 3 closed |
Disabled |
pins 1 & 2 closed |
pins 1 & 2 closed |
CACHE CONFIGURATION | |
Size |
Cache |
512KB |
(2) 256K x 9 |
2MB |
(2) 1M x 9 |
8MB |
(2) 4M x 9 |
Note: Both SIMM sockets must be occupied with identical SIMM's; i.e.: two 256KB, 1MB, or 4MB. The modules may be 8 or 9-bits wide and must be 80nsec or faster |