PERSTOR SYSTEMS INC.
ADRC-9008
Data bus: 8-bit, ISA
Size: Full-length, full-height card
Hard drives supported: Two MFM or RLL ST506/ST412 drives or one of each
Floppy drives supported: None
Maximum heads/cyl.: 15 heads and 1024 cylinders
|
CONNECTIONS | |
|
Function |
Location |
|
34-pin control cable connector-hard drive |
CN1 |
|
20-pin data cable connector-drive 0 |
CN2 |
|
20-pin data cable connector-drive 1 |
CN3 |
|
4-pin connector-drive active LED |
CN4 |
|
5-pin connector-DC power |
CN5 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
|
BIOS enabled |
JP1 |
closed | |
|
BIOS disabled |
JP1 |
open | |
|
BIOS ADDRESS | ||||||||
|
Address |
JP1/2 |
JP1/3 |
JP1/4 |
JP1/5 |
JP1/6 |
JP1/7 |
JP1/8 |
JP1/9 |
|
C400h |
closed |
open |
closed |
closed |
closed |
open |
open |
closed |
|
CA00h |
open |
closed |
open |
closed |
closed |
open |
open |
closed |
|
CC00h |
closed |
open |
open |
closed |
closed |
open |
open |
closed |
|
CE00h |
open |
open |
open |
closed |
closed |
open |
open |
closed |
|
D800h |
closed |
closed |
open |
open |
closed |
open |
open |
closed |
|
DC00h |
closed |
open |
open |
open |
closed |
open |
open |
closed |
|
DC00h |
open |
open |
open |
open |
closed |
open |
open |
closed |
|
MISCELLANEOUS TECHNICAL NOTES |
|
JP1/2 through 9 are the BIOS address select. The factory setting is C800 and is set with trace wires at JP1/jumpers 2, 3, 5, 6, and 9. BIOS address may be changed by cutting the traces and closing other pins, using the information in the table above. However, any modifications to the controller will void the warranty. |