MYLEX CORPORATION
DAC960PG
|
Card Type |
Hard drive controller card |
|
Maximum onboard memory |
128MB |
|
Hard Drives supported |
Up to 45 SCSI devices |
|
Floppy drives supported |
None |
|
Data Bus |
32-bit PCI |
|
Card Size |
Full-length, full-height card |
|
CONNECTIONS | |||
|
Function |
Location |
Function |
Location |
|
68-pin SCSI connector channel 0 - external |
CN1 |
68-pin SCSI connector channel 2 - internal |
CN5 |
|
68-pin SCSI connector channel 1 - external |
CN2 |
4-pin connector - drive active LED |
JP4 |
|
68-pin SCSI connector channel 0 - internal |
CN3 |
Battery backup connector |
J5 |
|
68-pin SCSI connector channel 1 - internal |
CN4 | ||
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Label |
Position | |
|
Factory configured - do not alter |
JP5 |
Unidentified | |
|
Factory configured - do not alter |
JP10 |
Open | |
|
Factory configured - do not alter |
JP12 |
Pins 1 & 2 closed | |
|
DRAM CONFIGURATION | |
|
Size |
Bank 0 |
|
4MB |
(1) 1MB x 36 |
|
8MB |
(1) 2MB x 36 |
|
16MB |
(1) 4MB x 36 |
|
32MB |
(1) 8MB x 36 |
|
64MB |
(1) 16MB x 36 |
|
128MB |
(1) 32MB x 36 |
|
MISCELLANEOUS TECHNICAL NOTES |
|
Note: If battery backup is not installed, a loopback plug must be installed. |